Tomographic analysis is used to provide a correction to low-pressure stoichiometric premixed CH(4)/O(2) flame temperatures measured with tunable diode laser absorption spectroscopy employing CO two-line thermometry. It is shown that flame temperatures measured with line-of-sight-based two-line thermometry are always too low and that the correction to the observed temperature is a nonlinear func...

We present a detailed set of measurements from a piloted, sooting, turbulent C2H4fueled diffusion flame. Hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering (CARS) is used to monitor temperature and oxygen, while laser-induced incandescence (LII) is applied for imaging of the soot volume fraction in the challenging jet-flame environment at Reynolds number, Re = 20,000. Single-la...

Temperature measurements have been performed in a low-pressure flame by the technique of diode laser induced atomic fluorescence. The experiments were done in a near-stoichiometric flat-flame of premixed methane, oxygen and nitrogen, at a pressure of 5.3 kPa. Indium atoms were seeded to the flame and probed using blue diode lasers; the lineshapes of the resulting fluorescence spectra were used ...

In this study, two flames of iso-pentanol were stabilized on a 60-mm flat flame burner at a low pressure of 15 Torr and analyzed by a flame-sampling molecular-beam setup coupled to a mass spectrometer (MBMS). Singlephoton ionization by synchrotron-generated vacuum-UV radiation with high energy resolution (E/∆E ∼0.04 eV) and/or electron ionization was combined with a custom-built reflectron time...

The main objective of the work reported here is to assess factors that could affect the outcome of a proposed open flame test for barrier fabrics (BF-open flame test). The BF-open flame test characterizes barrier effectiveness by monitoring the ignition of a flexible polyurethane foam (FPUF) layer placed in contact with the upper side of the barrier fabric, exposed to a burner flame from below....

nowadays, utilization of blended fuel in internal combustion engine is one of main topics in vehicle industries. the synergy effect will be highlighted when the potential of each fuel is employed and the engine performance will improve consequently.  in this research, the laminar flame speed of methane (main component of reference fuel for natural gas) and isooctane (main component of reference...

Semitendinosus muscles from low quality, cull cows were trimmed, separated into three fat levels (10, 20, and 30%), treated with 0, 5, 10, 15, or 20 seconds of surface flame application, ground, and formed into patties. Patties were quick frozen (-80 C for 1 hr) and stored at -10 C for 0, 4 or 24 days. Hunter “L” and “b” values increased (P<.01) and Hunter “a” values decreased (P<.01) as flame ...

For diffusion flames, the combination of oxygen enrichment and fuel dilution results in an increase in the stoichiometric mixture fraction, Zst, and alters the flame structure, i.e., the relationship between the local temperature and the local gas composition. Increasing Zst has been shown to result in the reduction or even elimination of soot. In the present work, the effects of variable Zst o...

On a television show, a pre-cooled bare-skinned person (TV host) passed through engulfing kerosene flames. The assumption was that a water film should protect him during 0.74 s flame exposure in an environment of 86 kW/m² heat flux. The TV host got light burn inflammation on the back, arms and legs. The present work studies skin temperatures and burn damage integral of such dangerous flame expo...