The objective of the work was to investigate statistical analysis of fracture toughness of the glass fiber reinforced composites at different stacking sequences, strain rate and crack length. The glass reinforced vinylester composites prepared by hand layup technique with stacking sequences of 0/90, 45/-45 and chopped strand orientations. 3point bending for fracture toughness test for various n...

(2005) Fracture behavior of polyetherimide (PEI) and interlaminar fracture of CF/PEI laminates at elevated temperatures. Abstract To investigate effects of environmental temperature on fracture behaviour of a polyetherimide (PEI) thermoplastic polymer and its carbon fibre (CF/PEI) composite, experimental and numerical studies were performed on compact tension (CT) and double cantilever beam (DC...

The effects of silicon (Si) on the mechanical properties and fracture toughness of heavy-section ductile cast iron were investigated to develop material for spent-nuclear-fuel containers. Two castings with different Si contents of 1.78 wt.% and 2.74 wt.% were prepared. Four positions in the castings from the edge to the center, with different solidification cooling rates, were chosen for micros...

Although the mode I (tensile opening) fracture toughness has been the focus of most fracture mechanics studies of human cortical bone, bones in vivo are invariably loaded multiaxially. Consequently, an understanding of mixed-mode fracture is necessary to determine whether a mode I fracture toughness test provides the appropriate information to accurately quantify fracture risk. In this study, w...

Degradation of cleavage fracture toughness for low carbon steels due to pre-straining and irradiation was investigated on the basis of the local fracture criterion approach. Formulation of cleavage fracture toughness through the statistical modelling proposed by BEREMIN has been simplified by the present authors to the expression involving yield stress and cleavage fracture stress of materials....

Electric tields can mtluence the fracture toughness offerroelectrics. For example, poled ferroelectrrcs cxhtbit fracture toughness anisotropy : the material is tougher for a crack parallel to the poling direction but less tough for a crack perpendicular to it. When an electric field is applied to a poled sample. a positive field reduces its fracture toughness but a negative field enhances it. P...

Indentation techniques for assessing fracture toughness are attractive due to the simplicity and expediency of experiments, and because they potentially allow the characterization of both local and bulk fracture properties. Unfortunately, rarely have such techniques been proven to give accurate fracture toughness values. This is a concern, as such techniques are seeing increasing usage in the s...

Mechanical behaviour of unsaturated polyester resin used for the composite materials has been studied to determine various important parameters, such as tensile and compressive, single edge-notch tensile fracture toughness, flexural properties and fracture energy. Fracture toughness, KIC, and fracture energy, GIC, obtained for the polyester resin lie between the typical values for epoxy resins ...

An investigation into the mixed mode fracture of steel fiber reinforced concrete (SFRC)beams with one percent volume fraction of steel fiber is presented. A series of notched beams withdifferent notch depths and locations are tested under three-point bending. The test results for apparentfracture toughness, crack trajectories, and fracture energy are presented. The crack paths for SFRCand plain...