an efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. the bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. the box-behnken design (bbd) was employed to design the experiments, to ...

Earlier studies at the Kevitsa Cu-Ni concentrator plant have indicated that seasonal variations of properties process water affect oxidation surface minerals, and further, pentlandite flotation performance. However, it is not clear whether differences in performance are solely due to changes mineral oxidation, and/or also oxidation-induced aqueous phase pulp. This paper investigates effects ore...

Kinetic models are the most important tools for the prediction and evaluation of the flotation circuits performance. In order to determine the kinetic order and rate of flotation of a Gilsonite sample, flotation experiments were conducted using the combination of Gasoline-Pine Oil, and one test without any collector and frother. The pulp density was 10% and the experiments were carried out in b...

a new method was introduced for frothing characterization of flotation frothers. method uses water recovery to develop a new frothability index named water recovery index (wri). new index was determined for some commercial frothers and results were compared with dynamic frothability index (dfi). results showed that water recovery index values follow the order of a-65 13016 s/mol > df-250 6292.4...

Response surface methodology (RSM) is one of the most effective tools for optimizing processes, and it has been used in conjunction with Analysis Variance (ANOVA) test to establish effect input factors on output factors. However, when this mineral flotation, its polynomial model usually performs poorly. An alternative use artificial neural networks (ANNs) such situations. Within context, ANOVA ...

Methylene blue was efficiently removed from aqueous solution by foam flotation using a rhamnolipid a biosurfactant as a dye collector. The effects of four parameters, namely, pH (1.5–11.5), frother concentration (5–65 ppm), aeration rate (2–6 L/min) and rhamnolipid to methylene blue weight ratio (0.5–6.5), on dye removal were studied and optimized using response surface methodology. Results...

It is well-known that entrainment of particles into the froth is a key factor in the selectivity and performance of the flotation process, especially for fine particle recovery. Since flotation is a continuous process, in this work, the effects of operating parameters on the entrainment of ash materials in a sample coal flotation is investigated from a time-sequence viewpoint. The effects of th...