Chromium oxide coatings were deposited on low-carbon steel by radiofrequency reactive magnetron sputtering at different oxygen flux values. X-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy were used to investigate the microstructure of chromium oxide coatings. Varying oxygen flux changed the coating microstructure; as with increasing oxyg...

J. Burja, F. Tehovnik, F. Vode, B. Arh, Institute of Metals and Technology, Ljubljana, Slovenia In this chromium slags that form during melting of chromium alloyed steels are examined. During melting and oxidation of these steel grades a considerable amount of chromium is lost, and gained back with slag reduction. Laboratory experiments were performed to study the mechanism of chromium oxide re...

We report the growth of high density silicon Oxide (SiOx) nanowires at an elevated temperature. The nanowires density is enhanced by inserting a thin layer of chromium metal in gold/Si catalyst system. The SiOx nanowires were grown with gold/chromium catalysts stack layer on the Si substrate at different temperatures ranging from 1050oC to 1150oC. Under the catalysis reaction of the gold/chromi...

This study evaluated the toxicity of hexavalent and trivalent compounds of chromium to the pacu, Piaractus mesopotamicus, in acute exposures of 96 h through mortality and histopathological responses. Hexavalent potassium dichromate was more toxic than trivalent compounds of chromium chloride, chromium oxide and chromium carbochelate. Sufficient mortalities occurred only with potassium dichromat...

Solid oxide fuel cells are high temperature electrochemical devices for direct conversion of fuel and oxidant to electricity and heat. The high temperature and dual atmosphere creates challenges for the materials in solid oxide fuel cell stacks. In this thesis SOFC stack materials were studied and developed. SOFC stacks are assembled at room temperature, then heated up, conditioned and operated...

Green nano pigments of Cr2O3 and CoCr2O4 were successfully prepared by polyol method followed by calcination at 770°C. The Cr2O3 and CoCr2O4 samples were characterized by X-ray diffraction XRD, scanning electron microscopy SEM, diffuse reflectance spectroscopy DRS, dynamic light scattering DLS, UV–Vis spectroscopy and CIE-Lab colorimetry methods. Dynamic light scattering analysis confirmed the f...

Auger Electron Spectroscopy (AES) has been used to study the surface compositions of three types of nickel based chromium alloys. These alloys are IN600, IN601 and C22. AES analysis indicated the presence of chromium and oxygen on their surfaces. The formation of this chromium oxide surface layer, 3 nm thick, provides excellent corrosion resistance. For alloy C22, no molybdenum was indicated on...

The transport processes in chromium oxide reviewed here, are related to the basic ionic processes in oxides. Solid state science has been effective in describing the complicated diffusion-controlled oxide growth of chromium and chromia-forming alloys. Additions of reactive elements to chromia-forming alloys have a remarkably beneficial effect and this effect is also related to ionic transport p...

Vanadium is an important metal used almost exclusively in ferrous and non-ferrous alloys due to its physicochemical and mechanical properties such as grain refinement, high tensile strength, hardness and fatigue resistance; it has a wide range of uses in the metallurgical and chemical sectors [1–3]. There are mainly three kinds of raw materials, bone coal, vanadium slag and waste vanadium catal...