Mathematical expression describing plastic behavior of steels allows the execution of parametric studies for many purposes. Various formulas have been developed to characterize stress strain curves of steels. However, most of those formulas failed to describe accurately the strain hardening behavior of steels in the full range which shows various distinct stages. For this purpose, a new formula...

The novel Cr-containing low alloy steels have exhibited good corrosion resistance in CO₂ environment, mainly owing to the formation of Cr-enriched corrosion film. In order to evaluate whether it is applicable to the CO₂ and H₂S coexistence conditions, the corrosion behavior of low-chromium steels in CO₂-H₂S environment with high pressure and high temperature was investigated using weight loss m...

Reduced-activation ferritic/martensitic (RAF/M) steels have been considered to be the prime candidate for the fusion blanket structural material. The irradiation data obtained up to now indicates rather high feasibility of the steels for application to fusion reactors because of their high resistance to degradation of material performance caused by both the irradiation-induced displacement dama...

A preliminary study was made on the antibacterial mechanism of copper-bearing antibacterial stainless steels against E.coli through experiments of microbiology such as EDTA (ethylenediaminetetraacetic acid) complexing, DNA smearing and AFM (atomic force microscope) observation. It was measured that the antibacterial stainless steels showed excellent antibacterial functions with antibacterial ra...

RoySorensen introduced the concept of an epistemic blindspot in the 1980s. A proposition is an epistemic blindspot for some individual at some time if and only if that proposition is consistent but unknowable by that individual at that time. In the first half of this paper, I extend Sorensen work on blindspots by arguing that there exist blindspots that essentially involve hopes. In the second ...

The higher steam temperatures and pressures required to achieve an increase in the thermal efficiency of fossil fuel fired power generation plant necessitate the application of steels with improved creep rupture strength. The 9% chromium steels developed during the last three decades are of great interest for components of advanced, high efficiency power plant. In this Paper, the development of...

Small-angle neutron scattering (SANS) and neutron powder diffraction (ND) techniques were used to study quantitatively the effect of nano-sized precipitates and boron addition on the mechanical properties of low-carbon steels. SANS was used to evaluate nano-sized precipitates, smaller than about 600 A in diameter, and ND was used to determine the weight fraction of the cementite precipitates. F...

In the present study, fracture toughness of functionally graded steels in crack divider configuration has been modeled. By utilizing plain carbon and austenitic stainless steels slices with various thicknesses and arrangements as electroslag remelting electrodes, functionally graded steels were produced. The fracture toughness of the functionally graded steels in crack divider configuration has...

It has been possible in recent times to make large quantities of steels in which the controlling scale is 20 nm or less, i.e., comparable to that of carbon nanotubes. The mechanical properties of such steels are abnormal. For example, in some cases the ductility vanishes as the strength increases, whereas in others the ductility almost entirely consists of uniform plastic strain. Some of the st...

In this work, tensile and yield stress and tensile and yield strain of oblique layer functionally graded steels produced by electroslag remelting were investigated. Functionally graded steels containing ferrite, austenite, bainite, and/or martensite layers may be fabricated via diffusion of alloying elements during the remelting stage. Tensile and yield stress and tensile and yield strain of fu...