In this work, ceramic hollow fiber supported polydimethylsiloxane (PDMS) composite membranes were developed by dip-coating PDMS layer on the surface of macroporous ceramic hollow fiber support. By controlling the properties of polymer solution and ceramic hollow fiber, high-quality ceramic hollow fiber supported PDMS composite membranes were fabricated for pervaporation (PV) recovery of biobuta...

We investigate four-wave mixing in hydrogen gas using a gas cell and a hollow fiber for the generation of high-energy, multicolor femtosecond (fs) optical pulses. Both a hydrogen-filled gas cell and hollow fiber lead to the generation of multicolor fs pulses in a broad spectral range from the deep ultraviolet to the near infrared. However, there is a difference in the energy distribution of the...

The 19th harmonic beam divergences from a Ti:sapphire laser generated using a gas jet and 10-mm-long hollow fibers with bore diameters of 300 and 200 μm were investigated. The beam quality factor M(2) of the harmonic beam generated in a 300-μm hollow fiber was found to be better than the gas jet using the phase match including the atomic dipole phase induced by the short trajectory. On the othe...

A sensing head based on a hollow-core photonic crystal fiber for in-reflection measurement of micro-displacements is presented. The sensing structure takes advantage of the multimodal behavior of a short segment of hollow-core photonic crystal fiber in-reflection, being spliced to a single mode fiber at its other end. A modal interferometer is obtained when the sensing head is close to a mirro...

In this study, polyphenylsulfone (PPSU) hollow fiber membrane was fabricated via a wet spinning method with the addition of ethylene glycol (EG) in the range of 0-10 wt% as the additive. The EG was added to improve the membrane pore formation and interconnectivity for better membrane contactor performance in extracting and removing the free fatty acid (FFA) from crude palm oil (CPO). Four diffe...

a membrane bioreactor (mbr) system based on a dead-end immersed hollow fiber membrane and filamentous fungus aspergillus oryzae were used for treatment of baker’s yeast wastewater. the fungus was adapted to the wastewater in the bioreactor for two weeks before starting the continuous process. average organic loading rate of 4.2 kg cod/m3.d was entered the bioreactor. mbr system was able to redu...

Guidance in a liquid core is possible with microstructured optical fibers, opening up many possibilities for chemical and biochemical fiber-optic sensing. In this work we demonstrate how the bandgaps of a hollow core microstructured polymer optical fiber scale with the refractive index of liquid introduced into the holes of the microstructure. Such a fiber is then filled with an aqueous solutio...

We demonstrate a nanosecond-pulse erbium-doped fiber laser that is passively mode locked by a hollow-core photonic crystal fiber filled with few-layered graphene oxide solution. Owing to the good solution processing capability of few-layered graphene oxide, which can be filled into the core of a hollow-core photonic crystal fiber through a selective hole filling process, a graphene saturable ab...

We have developed a new direct construction method for core build-up starting with the hypothesis that an improvement in pullout strength and a decrease in the number of voids in the restorative material will become possible by filling a hollow fiber reinforced post with the restorative material from the bottom of the root canal. For the pullout test, the hollow post was fixed to the head of a ...