A numerical study on the influence of forward-facing cavity length upon forward-facing cavity and opposing jet combined thermal protection system (TPS) cooling efficiency under hypersonic flow is conducted, by means of which the flow field parameters, heat flux distribution along the outer body surface are obtained. The numerical simulation results are validated by experiments and the cooling e...

The non-isotropic image interrogation technique is applied to study the compressible supersonic and hypersonic flow regimes. Supersonic flow experiments are performed in a blow-down windtunnel where the wake turbulence downstream of a wedge-plate model configuration is studied in the transonic M=1.35 regime. The hypersonic experiments are conducted in a short duration facility at Mach 6 and the...

Numerical results are presented for the shock-boundary layer interactions in a hypersonic flow over a sharp leading edge compression corner. In this study, a second- order Godunov type scheme based on solving a Generalized Riemann Problem (GRP) at each cell interface is used to solve thin shear layer approximation of laminar Navier-Stokes (N-S) equations. The calculated flow-field shows general...

The Hy-V project will conduct the first-ever mode-transition flight-test for a dual-mode hypersonic scramjet, which will occur at approximately 90,000 feet onboard a sounding rocket. At altitude, atmospheric conditions and inlet flow speed will match the flow conditions simulated in the UVA Aerospace Research Laboratory (ARL) hypersonic wind tunnel. Geometric similarity between the wind tunnel ...

Currently, a new generation of scientific aerospace vehicles, using advanced hypersonic airbreathing propulsion based on supersonic combustion technology, is in development at several research centers [1]. The 14-X Brazilian Hypersonic Aerospace Vehicle, Figure 1, designed by Rolim et al. [2], at the Prof. Henry T. Nagamatsu Laboratory of Aerothermodynamics and Hypersonics, Figure 2, at the Ins...

PURPOSE To evaluate porcine vitreous flow and water flow rates in a new prototype hypersonic vitrectomy system compared to currently available pneumatic guillotine vitrectors (GVs) systems. METHODS Two vitrectors were tested, a prototype, ultrasound-powered, hypersonic vitrector (HV) and a GV. Porcine vitreous was obtained within 12 to 24 h of sacrifice and kept at 4°C. A vial of vitreous or ...

Hypersonic flows around spatial vehicles during their reentry phase in planetary atmospheres are characterized by intense aerothermal phenomena. The aim of this work is to analyze high temperature flows around an axisymmetric blunt body taking into account chemical and vibrational non-equilibrium for air mixture species. For this purpose, a finite volume methodology is employed to determine the...

Flow field around hypersonic vehicles is very complex and difficult to simulate. The boundary layers are squeezed between shock layer and body surface. Resolution of boundary layer, shock wave and turbulent regions where the flow field has high values is difficult of capture. Detached eddy simulation (DES) is a modification of a RANS model in which the model switches to a subgrid scale formulat...