co2 injection is an effective technique for improved oil recovery in light oil reservoirs, especially for water flooding abandoned reservoirs. in this study, the lower part of es1 reservoirs in pucheng oilfield was introduced as the target reservoir. by studying the minimum miscible pressure in co2 flooding, the reservoir could achieve miscible flooding. long core displacement experiments prove...

A diagnostic technique capable of characterizing interfaces between transparent, immiscible fluids is developed and demonstrated by investigating the morphology of liquid-gas interfaces in an adiabatic two-phase flow through a microchannel of 500 μm × 500 μm square cross section. Water seeded with 0.5 μm-diameter fluorescent polystyrene particles is pumped through the channel, and the desired a...

A diagnostic technique capable of characterizing interfaces between transparent, immiscible fluids is developed and demonstrated by investigating the morphology of liquid–gas interfaces in an adiabatic two-phase flow through a microchannel of 500 lm 500 lm square cross section. Water seeded with 0.5 lm-diameter fluorescent polystyrene particles is pumped through the channel, and the desired adi...

Microscopic oil displacement of water flooding and sweep efficiency of continuous gas injection could be improved by water alternating gas (WAG) injection. The WAG injection process aims to squeeze more oil out of the reservoirs; in this method, water and gas are alternatively injected into the reservoir. Also, availability of hydrocarbon or CO2 gases in the field makes it attractive for gas-ba...

We investigate the domain growth and phase separation of hydrodynamically correct binary immiscible fluids of differing viscosity as a function of minority phase concentration in both two and three spatial dimensions using dissipative particle dynamics. We also examine the behavior of equal-viscosity fluids and compare our results to similar lattice-gas simulations in two dimensions.

in the continuous gas lift operation, compressed gas is injected into the lower section of tubing through annulus. the produced liquid flow rate is a function of gas injection rate and injection depth. all the equations to determine depth of injection assumes constant density for gas based on an average temperature of surface and bottomhole that decreases the accuracy of gas lift design. also g...

Abstract Three-phase flow in porous media is encountered many applications including subsurface carbon dioxide storage, enhanced oil recovery, groundwater remediation and the design of microfluidic devices. However, pore-scale physics that controls three-phase under capillary dominated conditions still not fully understood. Recent advances three-dimensional imaging have provided new insights in...

the development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. in petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. in this study, which is a...

the preparation of air–fuel mixture is considerably dependent on fluid flow dynamics to achieve improved performance, efficiency, and engine combustion in the appearance of flow. in this study, the effects of mixtures of hydrogen and compressed natural gas (cng) on a spark ignition engine are numerically considered. this article presents the results of a direct-injection engine using methane–hy...

according to the global fuel crisis, it seems necessary to use alternative fuel instead of gasoline. since the natural gas is cheaper, have higher frequency than gasoline and less pollution, it is a suitable fuel. many efforts have been done in order to replace gasoline with natural gas. one of the methods is to inject natural gas and gasoline fuel simultaneously and to use the benefits of both...