Abstract. A series of calculations and measurements have been made to evaluate the effect of eddy currents in the spherical tokamak ETE (Experimento Tokamak Esférico). Eddy currents occur in the central column of the conventional copper toroidal field magnet, around which the ohmic heating solenoid was tightly wound, and in the continuous wall of the vacuum vessel manufactured from inconel allo...

J. Belan, Faculty of Mechanical Engineering, University of Žilina, Žilina, Slovak Republic INCONEL alloy 718 is a high-strength; corrosion-resistant nickel chromium material used at -253 °C to 705 °C for production of heat resistant parts of aero jet engine mostly. The fatigue test provided on this kind materials were done via low frequency loading up to this time. Nowadays, needs of results at...

High quality, micron-sized interpenetrating grains of MgB₂, with high density, are produced at low temperatures (~420 °C < T < ~500 °C) under autogenous pressure by pre-mixing Mg powder and NaBH₄ and heating in an Inconel 601 alloy reactor for 5-15 h. Optimum production of MgB₂, with yields greater than 75%, occurs for autogenous pressure in the range 1.0 MPa to 2.0 MPa, with the reactor at ~50...

In this paper, a thorough review has been presented on the latest research work carried out for the enhancement of machining performance of one of the most commonly used superalloys that is, Inconel 718. The thermal energy has been frequently utilized for improving machinability characteristics of Inconel 718. The review of available literature indicates that plasma, laser, and electric dischar...

Because of the large volume of Inconel 718 used by the aerospace and power generation industries and the high percentage of metal removed to machine complex component geometries; understanding and improving the machining characteristics of Inconel 718 would result in substantial cost savings. While progress has been made in developing improved tool materials and machining processes, a detailed ...

Fine equiaxed grain regions are frequently observed in additively manufactured Inconel 718 alloy. Based on a grain-to-grain orientation analysis using EBSD, many assemblies of neighboring grains these have been found to display multiple-twins relationships sharing common 〈110〉 directions and exhibiting 5-fold symmetry. This is an experimental proof that the refinement inconel due Icosahedral Sh...