the steger and warming flux vector splitting implicit scheme is used to numerically solve two dimensional reynolds averaged navier–stokes (rans) equations governing the vortex induced vibration of a flexible riser laterally supported by a spring and a damper. the k–ε model is used as turbulence model to simulate the turbulent flow in the wake of the riser. to update the new position of the rise...

One of the newest of viscoelastic RANS turbulence models for drag reducing channel flow with polymer additives is studied in different flow and rheological properties. In this model, finitely extensible nonlinear elastic-Peterlin (FENE-P) constitutive model is used to describe the viscoelastic effect of polymer solution and turbulence model is developed in the k-ϵ-(ν^2 ) ̅-f framework. The geome...

Four classes of turbulence models (algebraic, k − , k − ω and a differential Reynolds-stress model) are applied to boundary layers under adverse pressure gradient with a constant equilibrium parameter β = δ * τ w dp dx. Numerical solutions up to Re θ = 10 8 give the classical scalings in the inner and outer layer for all models. Comparison is made with experiments of Clauser at β ≈ 2 and 8 and ...

Using experimental models along with conducting numerical analysis have been widely used in performance recognition and optimization of hydraulic equipments. Numerical modeling has lower cost rather than experimental one; however practical tests are commonly used because of the hydraulic structure importance especially in dams. Meanwhile numerical methods could be used for future designs throug...

Different variants for buoyancy-affected terms in k-ε turbulence model have been utilized to predict the flow parameters more accurately, and investigate applicability of alternative k-ε turbulence buoyant closures in numerical simulation of a horizontal gravity current. The additional non-isotropic turbulent stress due to buoyancy has been considered in production term, based on Algebraic Stre...

The turbulent flow in a tangential inlet / tangential outlet vortex tube is numerically simulated using a modified   k turbulence model. The results are compared to experimental measurements from literature. The modified model shows better agreement with the local tangential velocity measurements compared to the standard and RNG   k turbulence models. The flow structure is also demonstrated...

Flow separation at water intake is the main cause of head loss and flow discharge reduction. &#10As a result, study of shape and size of separation is very essential when designing an optimum water intake. Water intake is normally built with a 90 degree angle to the main channel flow direction. However, the flow structure in this type of water intake consists of large separation size along wit...