A catalytic technique to enhance graphite formation in nongraphitizing carbons was adapted to work with three-dimensional wood-derived scaffolds. Unlike many synthetic graphite precursors, wood and other cellulosic carbons remain largely disordered after high temperature pyrolysis. Using a nickel nitrate liquid catalyst and controlled pyrolysis conditions, wood-derived scaffolds were produced s...

Producing both hydrogen and high-value carbon nanotubes (CNTs) derived from waste plastics is reported here using a pyrolysis-reforming technology comprising a two-stage reaction system, in the presence of steam and a Ni-Mn-Al catalyst. The waste plastics consisted of plastics from a motor oil container (MOC), commercial waste high density polyethylene (HDPE) and regranulated HDPE waste contain...

In this study, carbon was made from walnut wood as a low-cost and non-toxicnatural adsorbent.Walnut wood(WC), were successfully synthesized by an in chemical vapor deposition methodthen characterized using FT-IR techniques and used for the removal of trihalomethanes(THMs) from aqueous solution. The trihalomethanes(THMs) removal by the developed adsorbent was investigated using batch adsorption ...

Thermal treatment of CCA impregnated waste wood is a way to utilize the energy resource of the wood and at the same time to reduce the volume of the waste. An issue of concern in relation to the thermal treatment is As emission to the air. Meanwhile there is still a matter to cope with when methods to avoid As emission are implemented; the residues with increased concentrations of Cu, Cr and As...

The production of methanol from agricultural, forestry, livestock, poultry, and fishery waste via pyrolysis was investigated. Pyrolysis was conducted in a tube furnace at 450-500 °C. Sugarcane bagasse showed the methanol production (5.93 wt.%), followed by roots and sawdust with 4.36 and 4.22 wt.%, respectively. Animal waste offered the lowest content of methanol, as only 0.46, 0.80, and 0.61 w...

Biochar is the product of the pyrolysis of organic materials in a reduced state. In recent years, biochar has received attention due to its applicability to organic waste management, thereby leading to active research on biochar. However, there have been few studies using food waste. In particular, the most significant difference between food waste and other organic waste is the high salinity o...

The purpose of this study was to judge the feasibility of gasification for the disposal of waste streams generated through salmon harvesting. Gasification is the process of converting carbonaceous materials into combustible "syngas" in a high temperature (above 700 degrees C), oxygen deficient environment. Syngas can be combusted to generate power, which recycles energy from waste products. At ...

Thermal degradation of waste plastics in an inert atmosphere has been regarded as a productive method, because this process can convert waste plastics into hydrocarbons that can be used either as fuels or as a source of chemicals. In this work, waste high-density polyethylene (HDPE) plastic was chosen as the material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse was...