In the new global economy, consumption has become a central issue for many fields of industries. This project work studied on the effectiveness of pulse duration of supercritical carbon dioxide (SCCO2) in machining performance in terms of cutting temperature, cutting force and surface roughness in turning AISI 1045 medium carbon steel by uncoated cemented carbide insert. Pulse mode reduces the ...

An attempt has been made to investigate the machinability of zirconia toughened alumina (ZTA) inserts while turning AISI 4340 steel. The insert was prepared by powder metallurgy process route and the machining experiments were performed based on Response Surface Methodology (RSM) design called Central Composite Design (CCD). The mathematical model of flank wear, cutting force and surface roughn...

Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...

a new dynamic friction model for modeling of elliptical vibration assisted turning (evat) was developed in this research. the periodic change of the friction force direction is known to be one of the most important causes of this phenomenon. in modeling of machining processes (including the evat process), static coulomb friction model was employed by most of the researchers. because of the peri...

Due to the widespread applications of fiber reinforced polymer composites in various industries, the machining of these materials to reach the desired shapes, close tolerances and surface finish quality is of great importance. But the composite materials are anisotropic and are mostly prepared in laminated form and, therefore, they have special chip formation behaviour. Among the effective para...

The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) are e...

Titanium alloy Ti–6Al–4V and nickel-based superalloy Inconel 718 have been widely employed in modern manufacturing. The published literature on high speed machining (HSM) of the two materials often involves different machining set-up, which makes it difficult to directly apply the research findings from onematerial to the other to select the most appropriate tool geometry and cutting conditions...

Inconel 718, a high-temperature alloy, is a promising material for high-performance aerospace gas turbine engines components. However, the machining of the alloy is difficult owing to immense shear strength, rapid work hardening rate during turning, and less thermal conductivity. Hence, like ceramics and composites, the machining of this alloy is considered as difficult-to-turn materials. Laser...

The quality of machined workpieces, particularly precious metals, is the main goal of every machining process. A suitable cutting fluid can substantially affect the machining outcome. The study is novel in that it uses nanofluids in the machining process to mitigate the adverse effects of high temperatures and friction. Graphene oxide (GO) nanoparticles were synthesized using the modified Humme...

Single point diamond turning tests were carried out on a B270 type glass. Submicrometer cutting conditions were applied in order to generate ductile response during single point machining. The profile generated by the rapid removal of the tool tip from the machined surface, analyzed by atomic force microscopy, showed that the brittle-to-ductile transition occurs at a few tenths of micrometers. ...