Two differently-produced open-cell aluminum foams were compared to a commercially available finned heat sink. Further, an aluminum plate and block were tested as a reference. All heat sinks have the same base plate dimensions of four by six inches. The first foam was made by investment casting of a polyurethane preform and has a porosity of 0.946 and a pore density of 10 pores per linear inch. ...

This report contains the results of attempting to improve on the results of Scott R. Sawyer and Alan M. L’Esperance research paper “Investigation of Paraffin Wax as an Energy Storage Medium Within a Shell-and-Tube Heat Exchanger.” The overall goal of the paper mentioned was to investigate the usefulness of wax as an energy storage medium. Scott R. Sawyer and Alan M. L’Esperance determined that ...

Studies of the crushing behavior of closed-cell, aluminum foam-filled aluminum and steel tubes have shown an interaction effect between tube wall and foam filler [1, 2, 3]. The crushing loads of foam-filled tubes are, therefore, found to be higher than the sum of the crushing loads of foam (alone) and tube (alone) mainly due to this effect. Santosa et al. [1], based on FEM results, proposed the...

The mining chute is an important equipment in the process of coal transportation and coal screening preparation. During the working process, the mining chute will generate a lot of vibration and noise because of constantly friction and impact of gangue and coal blocks. In order to reduce the vibration and noise during the operation of the chute, a new type of foam aluminum laminated structure i...

Open-­‐cell aluminum foams represent an important class of core materials that are used to manufacture lightweight sandwich-­‐structured composites. A nickel coa9ng applied by electro-­‐deposi9on can further improve their proper9es. In order to characterize these hybrid metal foams, we perform a full resolu9on computa9on of the microstructure. One of the commonly applied methods to obtain the g...

The mechanical behaviour of the oxide film that develops at metal-air interface molten A356 aluminum alloy is investigated in relation to oxidation level. Based on two previous papers - first one focusing chemical aspects process liquid surface aluminum, second its characterization, present paper aims reconciling these approaches usually considered separately literature and proposes a stand-alo...

Closed cell aluminum foams have received much recent attention as energy absorbing materials on account of their ability to undergo extensive deformation at a relatively low stress called the plateau stress. Several studies describe the improvements in energy absorption to be obtained, relative to their empty counterparts, when foam filled tubes are crushed either quasi-statically or dynamicall...

This work focuses on the use of metal foams, a relatively new class of materials, for high added-value electromagnetic (EM) shields. First, the Shielding Effectiveness (SE) of aluminum foam slabs is experimentally evaluated, showing very good shielding properties. Successively, accurate numerical models of metal foams are proposed and used in a proprietary Variable-Mesh Parallel Finite Differen...