Integration of micro-optical elements (MOEs) with optical fiber at top-end was realized by use of focused ion beam (FIB) direct milling. The designed MOEs (micro-refractive lens, microdiffractive lens with continuous relief, and micro-gratings) were directly milled by the FIB with ion energy and ion beam current of 40 keV and 569 pA, respectively, in the core area of both single mode fiber and ...

The mechanical behaviors of microstructures and micro-devices have drawn the attention from researchers on materials and mechanics in recent years. To understand the rule of these behaviors, the deformation measurement techniques with micro/nanometer sensitivity and spatial resolution are required. In this paper, a micro-marker identification method is developed to measure microstructure deform...

Micro-channel plate ~MCP! was used to intensify the image on the fluorescent screen in reflection high-energy electron diffraction. The primary electron current could be reduced by four orders of magnitude to get the image of the same intensity as in the measurement without MCP. The reduction of electron beam enabled observation of ionic crystal surfaces without causing electrolysis and chargin...

A novel beam position monitor, operated at zero bias voltage, based on high-quality chemical-vapor-deposition single-crystal Schottky diamond for use under intense synchrotron X-ray beams was fabricated and tested. The total thickness of the diamond thin-film beam monitor is about 60 µm. The diamond beam monitor was inserted in the B16 beamline of the Diamond Light Source synchrotron in Harwell...

In this article, the free vibration analysis of magneto-electro-elastic (MEE) Timoshenko micro beam model based on surface stress effect and modified strain gradient theory (MSGT) under moving nano-particle is presented. The governing equations of motion using Hamilton’s principle are derived and these equations are solved using differential quadrature method (DQM). The effects of dimensionless...

In this article, the bending and free vibration analysis of functionally graded (FG) nanocomposites Timoshenko beam model reinforced by single-walled boron nitride nanotube (SWBNNT) using micro-mechanical approach embedded in an elastic medium is studied. The modified coupled stress (MCST) and nonlocal elasticity theories are developed to take into account the size-dependent effect. The mechani...

We report the first fabrication of vertical three-dimensional micro-Fresnel lenses with polysilicon materials by surface micromachining technique. Micro-Fresnel lenses play a very important role in micro-optics because of their thin film structures and their ability to achieve very short focal lengths. Although micro-Fresnel lenses have been studied and well understood [ 11, the lens planes usu...

For a micro-Computed Tomography (Micro-CT) system, the microfocus X-ray tube is an essential component because the spatial resolution of CT images, in theory, is mainly determined by the size and stability of the X-ray focal spot of the microfocus X-ray tube. However, many factors, including voltage fluctuations, mechanical vibrations, and temperature changes, can cause the size and the stabili...