Sintering of metal powders is a well-established industrial process for specific applications, which allow a cheap series production of metal parts even with complex shape. The residual porosity, always present in sintered power compacts, limits their mechanical strength. On the other hand, for several products such porosity is needed. Products of that kind are for example: metal filters showin...

Microwave sintering (MWS) of commercially available 15-nm-size nanocrystalline TiN powder was studied. Densification kinetics and grain growth mechanisms of nano-TiN were evaluated using non-isothermal heating up to 1500 °C with variable heating rates. A true nanocrystalline ceramic with ~80-nm-size grains and 94.5 % theoretical density was obtained via MWS consolidation at 1400 °C. At higher t...

The need to move large volumes of highly abrasive materials, such as coal, grain, sand, and various waste products, places great demands on the piping systems through which they are conveyed. Excessive wear is a common problem, especially evident in the sections of pipe, which change the direction of flow of the abrasive material. . Due to their excellent wear characteristics, ceramic materials...

The aim of the present investigation is to study the sintering behavior of the Cu12Sn bronze system in both, a microwave furnace as well as a conventional furnace. The powders prepared by premixed and prealloyed routes were sintered in the range of solid state, transient and supersolidus liquid phase sintering conditions. The comparative analysis is based on the sintered density, densification ...

A new approach of utilizing microwave to pattern gradient concentric silver nanoparticle ring structures has been presented. The width and height of a single ring and the space between adjacent rings can be adjusted by changing the silver colloidal concentration and the microwave output power. By simply enhancing the ambient vapour pressure to the saturated value during microwave-assisted evapo...

The microwave sintered zirconia ceramics with 0, 1, 3, and 5 wt% TiO2 addition at a low sintering temperature of 1300°C and a short holding time of 1 hour were investigated. Effect of contents of TiO2 addition on microstructure and mechanical properties of microwave sintered zirconia bioceramics was reported. In the sintered samples, the main phase is monoclinic zirconia (m-ZrO2) phase and mino...

Many investigators have reported unexpected effects resulting from the use of microwave radiation as an alternative energy source during the processing of materials. This has included apparent evidence for accelerated kinetics for a range of processes in ceramic, polymeric and organic systems [1-10]; enhanced sintering of ceramic powder compacts, including lower sintering temperatures [1,2]; an...

Commercial lead zirconate titanate (PZT) perovskite powders were used to fabricate ceramic tape and then sintered by microwave and conventional methods. Both dielectric and piezoelectric properties of PZT ceramic tapes were studied in terms of sintering process. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) show the PZT perovskite phase with smaller grain size and dens...

Abstract In this project, nano-ZrO2 particles were dispersed in aluminum powder by a Y-shape mixer. The particle size of ZrO2 powder was < 40 nm and the amount of ZrO2 reinforcement varies from 3 to 15%.The mixed powders were compacted .Subsequently the compacted discs were sintered both in the microwave oven and in the conventional muffle furnace .Using microwave –assisted sintering method led...