The effect of temperature and moisture content on the thermal properties such as thermal conductivity, specific heat andbulk thermal diffusivity was evaluated. The thermal conductivity was measured by the transient technique using a line heat source. The maximum slope method was used to analyse the line source heating data for thermal conductivity determination. The specific heat capacity was m...

Addae-Mensah, Nda-Agyima K.. M.S.A.B.E., Purdue University, May 2014. Quality Changes in Hermetic Stored Corn caused by Fungi and Sitophilus zeamais (Motschulsky). Major Professors: Klein Ileleji and Linda Mason. Hermetic storage has been shown to be effective in controlling insect pests and maintaining grain quality of dry grains at 13% moisture and below. However, the feasibility and use of h...

Final conditioning of 25mm thick dried E. camaldulensis lumber was carried out in small capacity batch drying kiln in laboratory, and the elastic (EL) strain and mechano-sorptive (MS) strain was analyzed by slicing method. Mean moisture content(MC) of boards increases 2.5-3.0%, while surface MC increases from 9.8% to 14.2% and center MC always keeps at 12.3% or so. Difference of each slice oven...

Seeds lose their viability when they are exposed to high temperature and moisture content (MC) during storage. The expression and metabolism of proteins plays a critical role in seed resistance to heat stress. However, the proteome response to heat stress in oat (Avena sativa) seeds during storage has not been revealed. To understand mechanisms of heat stress acclimation and tolerance in oat se...

Purdue Improved Crop Storage (PICS) bags are used by farmers in Sub-Saharan Africa for pest management of stored grains and products, including maize. These bags hermetically seal the products, preventing exchange with external moisture and gases. Biological respiration within the bags create an environment that is unsuitable for insect development and fungal growth. This study was conducted to...

The purpose of this paper was to compare physical properties of conventional particleboard bonded with amounts of UF and PMDI resin and to examine the effect of mat moisture content (MC), wax content and platen temperature on their bonding efficiency, as determined by internal bond strength. It was found that PMDI not only gave superior board properties compared with the UF, but the amount requ...

Fissuring caused by rapid moisture adsorption generates appreciable amounts of broken kernels on subsequent milling, thereby reducing the economic value of rice. This study investigated how rapid moisture adsorption affects the extent of kernel fissuring in rice lots, as well as the physical and functional characteristics of broken kernels that result from milling such lots. Pure-line, long-gra...

The moisture sorption behaviour of three coating thicknesses of shellac and polyurethane films on Dalbergia sissoo substrate is studied in this paper. The thin films of either coat failed to reduce the water vapour transmission significantly. However, the thick coats were able to reduce this rate illustrating the importance film thickness of coating used on surfaces of wood products. The increm...

The supply of wood for energy is challenging due to high supply costs and rapidly increasing demand. As an important quality criterion, moisture content (MC) influences the revenues, demand and supply costs. For transport, the limiting factor is payload, if the MC is high. The effects of MC on costs and greenhouse gas (GHG) emissions for an optimized supply network have been analyzed using a pr...

In Ireland, timber and biomass haulage faces the challenge of transporting enough material within strict legal dimensions and gross vehicle weights restrictions for trucks and trailers. The objective of this study was to develop a method to control payload weight by knowing the moisture content of the wood. Weights, volumes, and moisture content were gathered from 100 truckloads of Sitka spruce...