Fiber-reinforced composite laminates are often used in severe environments such as high temperature and humidity conditions. Therefore, it is of practical interest to establish a simple but robust method to determine material properties that define the hygrothermal behavior of composites under various conditions. In this article a novel inverse analysis approach is presented to identify the dif...

In this study three types of Fibre reinforced composites Glassfibre/epoxy, Glassfibre/vinylester and Glassfibre/polyester resin are fabricated using Hand lay-up process and compacted in a Hotpress. The specimens of these three types of laminates were studied for moisture diffusion at two elevated hotwater temperatures of 90C and 60C to study the kinetics by computing the Diffusion coefficients ...

In this study, the effect of drying temperature, from 50 °C to 90 °C, on the drying characteristics of powdered peanut shell was investigated, and an isothermal procedure was used to determine the moisture diffusivity and the activation energy. All the experiments were performed using a thermogravimetric analyzer (TGA) for rapidly achieving the isothermal condition and accurately recording the ...

This article describes an improvement on a previous model proposed by Ba~ant and Najjar, in which moisture diffusivity and moisture capacity are treated as separate parameters. These parameters are evaluated from independent test results, and are shown to depend on the water:cement ratio, curing time, temperature, and cement type. The moisture capacity is obtained as the slope of the adsorption...

In this study, the effects of microwave drying power on drying kinetics, effective moisture diffusivity, and specific energy consumption of olive pomace were studied at three different microwave power levels of 170, 360 and 510 W. Increasing microwave power resulted in a considerable decrease in drying time. The experimental data for moisture loss was converted to moisture ratios and fitted to ...

thin layer drying behavior of sweet lemon slice was experimentally investigated in a convective type dryer and the mathematical modeling performed, using thin layer drying models given in literature. drying experiments were conducted at inlet drying air temperatures of 40, 50, 60, 70 and 80 ?c; two slice thicknesses of 3 and 6 mm, and, at one drying air velocity of 0.5 m/s with three replicatio...

Ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. The solid particles obtained in this process of drying were semi-porous and known as the group D of Geldart classification. The variations of moisture content with resident time, the effects of bed height on the pressure dro...