This paper presents part of a research into the small scale modelling of masonry. Small scale testing of masonry has been carried out by many authors, but few have attempted a systematic determination of the parameters that affect masonry at a small scale. The effect of increasing mortar strength and different sand gradings under compression were investigated. The results show masonry strength ...

This paper presents part of a research into the small scale modelling of masonry. Small scale testing of masonry has been carried out by many authors, but few have attempted a systematic determination of the parameters that affect masonry at a small scale. The effect of increasing mortar strength and different sand gradings under compression were investigated. The results show masonry strength ...

In this study, the influence of mechanically activated electric arc furnace slag (EAFS) was investigated through compressive strength tests on 50 mm mortar cubes. The objective was to convert the wasteful EAFS into a useful binding material to reduce the cement content in concrete without compromising strength and economy. Four different groups of mortar were cast which include control mortar, ...

In this study, the amount of cement used in a concrete mix is minimized to reduce the toxic effects on users by adjusting the concrete mixture contents. The reduction of cement is achieved by using various admixtures (ground granulated blast-furnace slag, flyash, ordinary Portland cement, and activated Hwangtoh powder). To apply the mix to construction, material property tests such as compressi...

in this work, we studied the effect of carboxylic acid on the rheological properties of a high-alumina cement mortar (ch45) produced by the algerian firm refractal.the investigated properties are setting time, water consumption, electrical conductivity, ph, density and the compressive strength. the results show a setting time of about 200 min for the acid free, 180 min with 0.1 % of carboxylic ...

This study successfully applied multi-mode laser cutting with the variation of the laser cutting speed to cement mortar for the first time. The effects of the amount of silica sand in the cement mortar on laser cutting are tested and analyzed. The kerf width and penetration depth of the specimens after laser cutting are investigated. As the laser cutting speed increases, the penetration depth d...

The construction industry is the largest consumer of natural resources which led to depletion of good quality natural sand (Fine aggregates). This situation led us to explore alternative materials and granular slag a waste industrial byproduct is one such material identified for utilization it as replacement of natural sand. This paper highlights upon the feasibility study for the utilization o...

AIMS To evaluate the effectiveness of various antimicrobial mortar formulations in inhibiting the growth of a selection of pathogens of environmental and hygienic concern. METHODS AND RESULTS Mortar prisms containing triclosan-incorporated fibres or different concentrations of silver copper zeolites were incubated with Escherichia coli, Listeria monocytogenes, Salmonella enterica or Staphyloc...

Consider solving a second order elliptic problem when the elliptic coefficient is highly heterogeneous. Generally, a numerical method either uses a very fine computational mesh to resolve the heterogeneities and therefore becomes computationally inefficient, or it performs efficiently on a coarse mesh but gives inaccurate results. Standard nonoverlapping domain decomposition using mortar spaces...

This paper is concerned with the convergence of mortar methods applied to linear elasticity. We prove that the conventional meshdependent norms used in the analysis of mortar methods are bounded below by the BV norm. When combined with standard results, this bound establishes a decomposition-independent and mesh-independent proof of the convergence of mortar methods in linear elasticity. 2005 E...