Finite element analysis was used to examine the initial stability after hip resurfacing and the effect of the procedure on the contact mechanics at the articulating surfaces. Models were created with the components positioned anatomically and loaded physiologically through major muscle forces. Total micromovement of less than 10 mum was predicted for the press-fit acetabular components models, ...

Reversible control of surface wettability has wide applications in lab-on-chip systems, tunable optical lenses, and microfluidic tools. Using a graphene sheet as a sample material and molecular dynamic simulations, we demonstrate that strain engineering can serve as an effective way to control the surface wettability. The contact angles θ of water droplets on a graphene vary from 72.5◦ to 106◦ ...

Adsorption capacity of 4-chloro-2-nitrophenol (4C2NP) onto nano-Ti02 from aqueous solutions wasinvestigated in a batch system by considering the effects of various parameters like contact time, nano-TiO2 dosage, initial pH and initial 4C2NP concentration. Optimum conditions for 4C2NP adsorptionwere found to be initial pH z 2, nano-TiO2 closer- 0.01 g and equilibrium time 1 h. The adsorptionkine...

the objective of this research is characterizing the effect of nano-zinc oxide (nano-zno) dispersions on leach resistance and contact angle of beech wood (fagus orientalis lipsky). the beech wood was cut into standard dimension, and oven dried after treating with nano-zno solution, based on immersion method. three treating nano-zno solution levels: (o, 20000 and 40000 ppm), and two thermal trea...

Surface modification is a promising method to solve the tribological problems in microsystems. To modify the surface, we fabricated hierarchical patterns with different pitches of nano-scale features and different surface chemistries. Micro- and nano-patterns with similar geometrical configurations were also fabricated for comparison. The nano-tribological behavior of the patterns was investiga...

A new course in nanoscale mechanics for engineering students was recently taught at the University of Wisconsin Madison. Mechanics enters a new regime at the nanoscale, where the effects of surfaces, interfaces, defects, material property variations, and quantum effects are accentuated. This course provided an introduction to nanoscale engineering with a direct focus on the critical role that m...

In this paper, a teleoperated nanoscale touching system is proposed, and continuum nanoscale contact mechanics models are introduced. The tele-nanorobotic system consists of a piezoresistive nanoprobe with a sharp tip as the nanorobot and force and topology sensor, a custom-made 1 degree of freedom haptic device for force-feedback, 3-D Virtual Reality graphics display of the nano world for visu...

Some novel micro/nano-moiré methods have been developed at the Failure Mechanics Lab in Tsinghua University. This paper offers an introduction of these new methods, which can be realized under focus ion beam (FIB) system,scanning electron microscope (SEM), atomic force microscope (AFM), scanning tunneling microscope(STM) as well as laser scanning confocal microscope (LSCM). These micro/nano-moi...