The recrystallization behavior of cold-rolled, commercial-purity titanium was studied experimentally and with Monte-Carlo (MC) modeling. Utilization of EBSD-OIM as input for MC modeling resulted in realistic predictions of recrystallization kinetics, microstructure and texture, which were in good agreement with experimental results. MC modeling of recrystallization kinetics predicted that non-u...

One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored i...

The current understanding of the fundamentals of recrystallization is summarized. This includes understanding the as-deformed state. Several aspects of recrystallization are described: nucleation and growth, the development of misorientation during deformation, continuous, dynamic, and geometric dynamic recrystallization, particle effects, and texture. This article is authored by the leading ex...

The strength of any material is dependent on the grain size and percentage of volume fraction recrystallization. In this Paper, a new approach for controlling microstructure development during hot working process by percentage of volume fraction recrystallization is proposed. Here two different methods are employed. One of the approaches is based on the Optimal Control theory and involves the d...

The recrystallization textures of a cold-rolled Al-Mn-Fe-Si model alloy with three different microchemistry states after non-isothermal annealing were studied. The microstructure and texture evolution have been characterized by EBSD. It is clearly demonstrated that the actual microchemistry state as determined by the homogenization procedure strongly influence the recrystallized grain size and ...

Herein, the microstructure stability of a newly developed hot‐working die (HWD700) steel at elevated temperatures up to 700 °C is investigated using transmission electron microscopy (TEM), selected‐area diffraction, energy‐dispersive spectrometer, and high‐resolution microscope. The results show that HWD700 exhibits higher thermal than commercial H13 when temperature °C. After quenching temperi...

The reaction between aqueous Fe(II) and Fe(III) oxides is extremely complex, and can catalyze Fe(II)-Fe(III) electron transfer, exchange of Fe atoms between the aqueous and solid phases, mineral transformation, and contaminant reduction. Together, these processes represent a phenomenon referred to as Fe(II)-catalyzed Fe oxide recrystallization, which has been observed under controlled condition...

As-produced Cr-coated Optimized ZIRLO™ cladding material fabricated with the cold-spray (CS) deposition process is studied. Cross-sectional electron microscopy, nano-hardness profiling, transmission Kikuchi diffraction, and atom probe tomography (APT) were performed to investigate nature of CS Cr-coating/Optimized interface, microstructure coating, effects on Zr-substrate microstructure. The fo...

In this study, the grain boundary character and texture of 50% and 90% cold-rolled FePd alloy was investigated during recrystallization at 700 °C. Electron backscatter diffraction (EBSD) measurements were performed on the rolling direction to normal direction section. Kernel average misorientation (KAM) calculated from EBSD measurements was employed to determine the recrystallization fraction. ...

Steinernema feltiae is a moderately freezing tolerant nematode, that can withstand intracellular ice formation. We investigated recrystallization inhibition, thermal hysteresis and ice nucleation activities in the infective juveniles of S. feltiae. Both the splat cooling assay and optical recrystallometry indicate the presence of ice active substances that inhibit recrystallization in the nemat...