In order to study the metadynamic recrystallization behavior of 34CrNi3MoV steel, a double-pass isothermal compression experiment and single-pass thermal interval were designed conducted obtain stress–strain curves under different deformation conditions explore action law parameters during process. The softening rate was calculated by compensation method, grain size in region measured. Based on...

Segregation at metal alloy surfaces is an important issue because many electrochemical and catalytic properties are directly correlated to the surface composition. We have performed density functional theory calculations for Mo segregation in MoNi(111) in the presence of chemisorbed atomic oxygen. In particular, the coverage dependence and possible adsorption-induced segregation phenomena are a...

The equiatomic CoCrFeMnNi alloy and the quaternary alloys with no addition of one element were fabricated, roles alloying elements in corrosion resistance clarified. In 1 M H2SO4, passivity was mainly due to Cr. Co Fe additions also contributed decrease current density. While Ni found suppress active dissolution, Mn increased dissolution rate. without indicated superior pitting 0.1 NaCl. To imp...

A new generation of alloys, which rely on a combination of various strengthening mechanisms, has been developed for application in molten salt nuclear reactors. In the current study, a battery of dispersion and precipitation-strengthened (DPS) NiMo-based alloys containing varying amounts of SiC (0.5-2.5 wt %) were prepared from Ni-Mo-SiC powder mixture via a mechanical alloying (MA) route follo...

Intermetallic compounds have been studied for their potential application as structural wear materials or coatings on engineering steels. In the present work, a newly designed intermetallic composite in a Ni-Mo-Si system was fabricated by arc-melting process with commercially pure metal powders as starting materials. The chemical composition of this intermetallic composite is 45Ni-40Mo-15Si (at...

Ni-Al-Mo based alloys can be used as materials for high temperature applications. They prepared by various techniques such an electron beam zone melting, which allows us to obtain the with a directionally solidified structure and unique properties. A plasma-melted Ni-Mo master alloy was preparation of experimental alloys. were melted in induction furnace then cast centrifugally form bars. These...

The composition dependence of the emission intensities was investigated in Cu-Ni as well as Ni-Zn binary alloy samples when a low-pressure argon laser-induced plasma was employed as the excitation source. The calibration curve in the Cu-Ni alloy system gave a linear relationship, implying that the selective evaporation of Cu or Ni atoms was caused less in those alloys having several chemical co...