The physical and mechanical properties of samples of a nickel-base alloy fabricated by powder metallurgy were determined. The particle sizes of the powders used to make the samples varied from -80/ +200 mesh to -325 mesh. The compaction pressure varied from 138 to 414 MN/m2 and the sintering temperature varied from 1150 to 1250 degrees C. The shrinkage during processing, the porosity, tensile s...

Four nickel clusters, cyclo-[{Ni(μ-S(i)Pr)(μ-SMe)}(6)] (1), cyclo-[{Ni(μ-StBu)(μ-SMe)}(6)] (2), cyclo-[{Ni(μ-S(i)Pr)(μ-SEt)}(6)] (3) and cyclo-[{Ni(μ-StBu)(μ-SEt)}(10)] (4), based on thiolate ligands have been successfully synthesized and characterized by elemental analysis, FT-IR spectra, UV-vis-NIR spectra, powder X-ray diffraction and single-crystal X-ray diffraction. Intriguingly, the SMe a...

Nickel oxide nanoparticles and nanoflowers have been synthesized by a soft reaction of nickel powder and water without organics at 100 C. The mechanism for the formation of nanostructures is briefly described in accordance with decomposition of metal with water giving out hydrogen. The structure, morphology, and the crystalline phase of resulting nanostructures have been characterized by variou...

Comproportionation reactions of yttrium triiodide, yttrium and nickel led to the formation of the compound [NiY6]I10, which is isostructural with the prototypical [RuY6]I10. In particular, [NiY6]I10 is composed of isolated nickel centered yttrium octa-hedra (site symmetry -1) that are further surrounded by iodide ligands to construct a three-dimensional cluster complex framework. Although this ...

The influence of milling and subsequent annealing on nickel-ferrite phase formation was investigated by X-ray diffraction (XRD). Microstructure and magnetic properties of NiFe2O4 were determined by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and vibration sample magnetometry (VSM). Single phase nanosized nickel-ferrite was obtained by 30 h mechani...

Nanoparticles of nickel have been prepared by laser-driven decomposition of nickel carbonyl. In this method, an infrared laser rapidly heats a dilute mixture of nickel carbonyl and a photosensitizer in a carrier gas to decompose the precursor and initiate particle nucleation. To produce nickel nanoparticles, nickel carbonyl was generated in situ from activated nickel powder and CO at room tempe...

A neural network approach is presented for the estimation of shrinkage during a hot isostatic pressing (HIP) process of nickel-based superalloys for near net-shape manufacture. For the HIP process, the change in shape must be estimated accurately; otherwise, the ®nished piece will need excessive machining and expensive nickel-based alloy powder will be wasted (if shrinkage is overestimated) or ...

BACKGROUND: In this paper, a physical method to prepare copper-nickel alloy particles in the sub-micron range for possible self controlled magnetic hyperthermia treatment of cancer is described. It is reported that an increase in tumor temperature decreases the tumor resistance to chemo- and radiation therapies. Self controlled heating at the tumor site to avoid spot heating is managed by contr...

In this paper, nickel oxide (NiO) nanoparticles have been prepared by solid state thermal decomposition of an acyclic nickel(II) complex (1,2-bis(2-formyl-3-methoxyphenyl)propane)nickel(II) chloride, [NiL]Cl2, in an electrical furnace at optimal temperature, 450 ºC for 3.5 h. The nickel(II) complex is obtained via solid state synthesis using nickel(II) chloride and tetradentate O4 acyclic ligan...

An efficient and exceptionally mild intramolecular nickel-catalyzed carbon-oxygen bond-forming reaction between vinyl halides and primary, secondary, and tertiary alcohols has been achieved. Zinc powder was found to be an essential additive for obtaining high catalyst turnover and yields. This operationally simple method allows direct access to cyclic vinyl ethers in high yields in a single step.