--This study attempts to understand the effect of different UV irradiation methods on the intercalation of LDPE/MMT nanocomposites, and its molecular behavior at certain isothermal crystallization temperature. Three different methods of UV exposure were employed using single composition of LDPE/MMT nanocomposites. All samples were annealed for 5 hours at a crystallization temperature of 100oC. ...

Commercial poly(p-phenylene sulfide) (PPS) was thermally cured, which resulted in an increase of molecular weight due to cross-linking. Non-isothermal crystallization studies of samples cured for up to 7 days at 250 ̊C showed a monotonous increase of crystallization temperature compared to pure PPS. However, a further increase of curing time decreased the crystallization temperature. The change ...

Non-isothermal crystallization kinetics has been traditionally predicted using the Nakamura crystal growth model, which is an integral form of Avrami equation under assumption that non-isothermal can be explained a series infinitesimal isothermal steps. However, model often overpredicts fraction near end because ignoring slower secondary kinetics. In this study, dual proposed to capture both pr...

The formation of intragranular pores, induced by diopside crystallization in diopside–albite glasses, was highlighted in a previous study and here confirmed by SEM observation. The sinter-crystallization kinetics of four glass compositions, labelled G1, G2, G3 and G2-Cr, characterized by the formation of induced crystallisation porosity, PCR, was investigated. The activation energies of crystal...

The isothermal and nonisothermal crystallization kinetics of monoglyceride (MAG) organogels were studied by pulsed nuclear magnetic resonance (pNMR) and differential scanning calorimetry (DSC), respectively. The Avrami equation was used to describe the isothermal crystallization kinetics and experimental data fitted the equation fairly well. Results showed that the crystal growth of MAG organog...

Thermal behavior of palm stearin (PS) and palm olein (PO) was explored by monitoring peak temperature transitions by differential scanning calorimetry (DSC). The fatty acid composition (FAC), isothermal crystallization kinetics studied by pulsed Nuclear Magnetic Resonance (pNMR) and isothermal microstructure were also compared. The results indicated that the fatty acid composition had an import...

Melting and crystallization of poly(vinylidene fluoride) (PVDF) blended with polyamide 6 (PA6) has been studied by differential scanning calorimetry. The melting of PVDF and PA6 is observed over a small temperature range, i.e. 174 to 181°C and 220 to 230°C, respectively, over the whole blend composition. This observation indicates that PVDF and PA6 are immiscible and do not co-crystallize, alth...