A novel compact microstrip-fed planar monopole antenna with quad-notched bands is presented. The proposed antenna is based on one rectangular-stepped-patch. To achieve the higher resonance over the 12GHz, one lateral L-shaped structure is embedded in the ground. By inserting four U-shaped slots in the radiation patch, quad band-notched properties in the WiMAX (3.3–3.6GHz), INSAT (4.5–4.8 GHz), ...

The design and analysis of an ultra wideband aperture antenna with dual-band-notched characteristics are presented. The proposed antenna consists of a circular ring exciting stub on the front side and a circular slot on the back ground plane. By utilizing a parasitic strip and a T-shaped stub on the antenna structure, two notched bands of 850 MHz (3.5-4.35 GHz) and 900 MHz (5.05-5.95 GHz) are a...

Patch antenna with double notches and triangular tapered feeding line has been investigated. It is observed that broadband matched double-notched patch antenna is suitable for tri-band operations from simulation and experimental results. It shows a measured return loss well below –10 dB in all three-frequency bands of operation. It has also been observed that the double notched conventional rec...

A new microstrip ultra-wideband (UWB) bandpass filter (BPF) with triple-notched bands is presented in this paper. The circuit topology and its corresponding electrical parameters of the initial microstrip UWB BPF are desired by a variation of genetic algorithm (VGA). Then, triple-notched bands inside the UWB passband are implemented by coupling a square ring short stub loaded resonator (SRSSLR)...

A novel ultra-wideband (UWB) bandpass filter (BPF) with notched band based on microstrip/slotline ring resonators is presented in this paper. The UWB BPF is fabricated with two microstrip ring resonators on the top copper layer and a slotline ring resonator on the bottom ground layer. Thus, an ultra-wide passband can be achieved owing to the coupling effects and microstrip/slotline transitions ...

A new ultawideband circular fractal antenna with notched-band characteristics is presented. A notched-band characteristic is achieved by employing a U-shape slot in 50 Ω feed lines. The ultra-wideband impedance matching and compact size have been obtained by using CPW-feed technique and the fractal concept. The measured result of proposed fractal antenna exhibits the ultra wideband characterist...

This paper presents a summary of the tests performed within a VAMAS (Versailles Project on Advanced Materials and Standards) round robin to examine the measurement of mode II interlaminar fracture toughness using four different test methods based on: End Notched Flexure (ENF), Stabilised End Notched Flexure (SENF), End Loaded Split (ELS), and four point End Notched Flexure (4ENF) carbon fibre r...