The input power to a centrifugal pump is optimized by changing the impeller blade exit angle. In optimization, angles of three meridional profile layers are selected as design variables, while shaft and head developed multi-objective optimization functions obtained through surrogate model. A genetic algorithm used find optimum point. Computational fluid dynamics simulations performed solve Reyn...

The main limitation of centrifugal pump running in turbine mode is lower efficiency at part load operating conditions as compared to conventional hydro turbines. To enhance the utilization of pump as turbine (PAT) in mini/micro hydropower plants, it is very important to improve its performance with some low cost modifications. The part load efficiency of PAT can be improved by guiding the flow ...

experimental work was carried out to investigate the influence of impeller speed, granulation time, binder mass and their interactions on granule size distribution, mean size and binder content distribution in a conical high shear granulator. it was observed that the response of high shear granulation to changes in process parameters varies significantly from one operating condition to another....

abstract: impeller trimming is a proper way to alter the performance of centrifugal pump with a constant speed so as to meet the demand on the specified flow rate and head in pumping systems. the affinity law accounting for the impeller trimming is the key relation to determine the pump performance with a trimmed impeller. there seems no experimental study dealing with such an affinity law for ...

The VentrAssist implantable rotary blood pump, intended for long term ventricular assist, is under development and is currently being tested for its rotor-dynamic stability. A shaftless impeller, which also acts as the rotor of the brushless DC motor, is passively suspended in the pump cavity by hydrodynamic forces. The paper presents experimental investigation of the displacement of the impell...

Centrifugal compressors are most widely used in large capacity refrigeration and air conditioning plants. Its other applications include in gas turbines for air craft applications, diesel engine turbochargers, chemical and process industries, factory workshop air supplies etc. In refrigeration field these are suitable for high specific volume refrigerants or low pressure stages. They have been ...

A computational fluid dynamics (CFD) model that evaluates mechanical mixing in a full-scale anaerobic digester was developed to investigate the influence of sewage sludge rheology on the steady-state digester performance. Mechanical mixing is provided through an impeller located in a draft tube. Use is made of the Multiple Reference Frame model to incorporate the rotating impeller. The non-Newt...