Municipal and industrial wastewater treatment plants produce large amounts of sludge. This excess sludge is an inevitable drawback inherent to the waste activated sludge process. Both the reduction of the amount of sludge produced and improving its dewaterability are of paramount importance. Novel pre-treatment processes have been developed in order to improve sludge dewatering, handling and di...

Combination of a partial nitritation process and an anaerobic ammonium oxidation process for the treatment of sludge reject water has some general cost-efficient advantages compared to nitrification-denitrification. The integrated process features two-stage autotrophic conversion of ammonium via nitrite to dinitrogen gas with lower demand for oxygen and no external carbon requirement. A nitrify...

Varnish and sludge formation are considered as one of the most common problems in lubrication and hydraulic systems. In order to simulate the condition of sludge formation, base stock lubricant (Group 1 API) has been selected and exposed to heat in a laboratory setup. Sludge formation process accelerated in the laboratory scale and solid liquid equilibrium data were extracted. Then solid-liquid...

Apseudohomogeneous model of the nitrifying activated sludge process was developed to investigate the effects ofmass-transport resistance and heterotrophic/nitrifier competition on the apparent relationship between dissolved oxygen (DO) concentration and nitrification . The kinetics of both heterotrophic carbon oxidation and autotrophic ammonia oxidation within activated sludge flocs were descri...

BACKGROUND Electrochemical methods, as one of the advanced oxidation processes (AOPs), have recently been applied to remove different contaminants from water and wastewater. This study compares the performance of anodic oxidation (AO) and electro-Fenton (EF) methods on waste sludge treatment. METHODS This experimental study was performed on real sludge and the effect of operating parameters s...

The activated sludge process is commonly used to treat wastewater by aerobic oxidation of organic pollutants into carbon dioxide and water. However, several nonoxidative mechanisms can also contribute to removal of organics. Sorption onto activated sludge can remove a large fraction of the colloidal and particulate wastewater organics. Intracellular storage of, e.g., polyhydroxyalkanoates (PHA)...

In the present study, the catalytic wet oxidation of pharmaceutical sludge by molecular sieve loaded with Cu/Ce as catalyst was investigated. Experiments were performed in an experimental batch reactor. Reaction parameters including catalyst dose, temperature, time, and oxygen pressure were discussed. The results showed that the catalysts prepared by co-precipitating method have good catalytic ...

The kinetics of propionate degradation, acetate splitting, and hydrogen consumption in digesting sludge were investigated in a lab-scale digester. At natural steady-state conditions, the acetate-splitting systems in well-digested sludge were about half saturated. Propionate-degrading systems were saturated to only 10 to 15%, and hydrogen removal was less than 1% of the maximum possible rate. It...

underground coal gasification (ucg) is a non-conventional method of extracting gas from coal. the primary advantage of ucg is that it recovers gas from uneconomical or unminable coal, potentially increasing the value of the world’s coal reserves by an estimated 70%; for this reason, ucg has been implemented at sites around the world. however, the gaseous, liquid and solid waste streams which ac...

The practical application of the Fenton-based treatment method for organic compounds-contaminated water purification is limited mainly because of the large amount of ferric sludge formed during the treatment, where ferrous iron (Fe(II)) is used as the activator of the hydrogen peroxide oxidation processes. Reuse of ferric sludge collected from clarifiers to substitute Fe(II) salts allows reduci...