although the solubility of oxygen in molten aluminum alloys is said to be negligible, the fresh surface of the melt oxidizes quickly in the air and an oxide film is formed on the melt surface. oxide-metal-oxide sandwich technique is a method for the study of short-time surface oxide films. in this research, air was blown at 0.5 atmosphere into the melts of al-1mg and al-6mg alloys by means of a...

Abstract: Graphene oxide nanowalls were prepared by casting an aqueous dispersion of polystyrene latex particles onto a graphene oxide film followed by tetrafluoromethane plasma etching. Mild plasma etching conditions allowed the oxygen functional groups on the graphene oxide nanowalls to be retained. It was found that exposure to a xenon light source of such graphene oxide nanowalls coated wit...

This study investigates the effects of oxide traps induced by SOI of various thicknesses (TSOI = 50, 70 and 90 nm) on the device performance and gate oxide TDDB reliability of Ni fully silicide metal-gate strained SOI MOSFETs capped with different stressed SiN contact-etch-stop-layer (CESL). The effects of different stress CESLs on the gate leakage currents of the SOI MOSFET devices are also in...

In this work, we present an experimental technique for obtaining highly ordered L1 FePt-oxide thin film media at moderate deposition temperatures. In most previous studies, a FePt-Oxide layer is directly deposited on a (001) textured MgO layer. By introducing a buffer layer in between the FePt-oxide layer and the MgO underlayer, we are able to substantially enhance the L1 ordering of the FePt-o...

The study develops an integrated humidity microsensor fabricated using the commercial 0.18 μm complementary metal oxide semiconductor (CMOS) process. The integrated humidity sensor consists of a humidity sensor and a ring oscillator circuit on-a-chip. The humidity sensor is composed of a sensitive film and branch interdigitated electrodes. The sensitive film is zinc oxide prepared by sol-gel me...

The study investigates the fabrication and characterization of an ethanol microsensor equipped with a heater. The ethanol sensor is manufactured using the commercial 0.18 µm complementary metal oxide semiconductor (CMOS) process. The sensor consists of a sensitive film, a heater and interdigitated electrodes. The sensitive film is zinc oxide prepared by the sol-gel method, and it is coated on t...

The oxides of many transition metals wet their own metal surface. The adhesion energy at this interface (E(adh,ox/m)) provides extra stabilization, which lowers the O2 pressure required for oxide stability as a thin film below that required for bulk-oxide stability by the factor exp[(2gamma(g/ox) - E(adh,ox/m))/(tN(ox)RT)], where gamma(g/ox) is the surface energy of the oxide, t is the oxide fi...

Growth and evolution of germanium (Ge) nanocrystals embedded into a silicon oxide (SiO2) system have been studied based on the Ge content of co-sputtered Ge-SiO2 films using transmission electron microscopy (TEM) and Xray photoelectron spectroscopy (XPS). It was found that when the proportion of Ge relative to Ge oxide is 20%, TEM showed that annealing the samples at 800C for 60 min resulted in...

It has been considered that the corrosion of passive metals and alloys is not caused by the active metal-dissolution but the dissolution of a nonporous passive oxide film in aqueous solution. The corrosion current density of iron(1)(2), chromium(3) and their alloys(4) is independent of the potential in all the range of passivity, although depending upon the pH of solution. Vetter(1) explained s...

The integration of gas sensor components into smart phones, tablets and wrist watches will revolutionize the environmental health and safety industry by providing individuals the ability to detect harmful chemicals and pollutants in the environment using always-on hand-held or wearable devices. Metal oxide gas sensors rely on changes in their electrical conductance due to the interaction of the...