نتایج جستجو برای: pact process simultaneous activated sludge and powdered activated carbon system
تعداد نتایج: 17304533 فیلتر نتایج به سال:
Background and Objective: Wastewater treatment and stabilization always imposes costs and consequently a lot of energy on wastewater treatment plants. To achieve the purification and stabilization of as much sludge as possible, breaking complex components into simpler components is considered a critical step. Therefore, this study aimed to evaluate the feasibility of treating the produced sludg...
this study examined the adsorption behavior of two cationic dyes used in textile industries (cibasic red 46 and ci basic blue 3) on tunisian clay used in pottery. the ability of pottery clay to remove thebasic dyes from aqueous solution was compared to that of the commercial powdered activated carbon (pac)and raw clay. physicochemical characteristics of these adsorbents were performed by boehm ...
combined electrochemical and biological treatment for pesticide degradation – application to phosmet
the aim of this study was to determine the feasibility of coupling an electrochemical process with a biological treatment in order to degrade phosmet, an organophosphorous pesticide. the absence of biodegradability of phosmet by pseudomonas fluorescens and activated sludge was verified in our operational conditions. so, a conventional biological treatment is not appropriate for phosmet polluted...
Background and Aim: The aims of this study was to explore the feasibility of improving efficiency of the wastewater treatment system of the Fars Pegah Dairy Industries (FPDI) and propose ways to upgrade it in 2006-2007. The FPDI wastewater treatment system was of a successive anaerobic-aerobic type using anaerobic stabilization ponds and conventional and extended aeration activated sludge. Due ...
background: the widespread use of toluene and its consequent adverse effects on health and specially its chronic effects on the central nervous system has resulted in many studies being carried out on the methods that can control and reduce toluene vapors in the airflow. the objective of this study is to assess the effectiveness of the catalytic ozonation process in the removal of toluene from ...
Introduction: Nowadays, application of MTBE due to its physical and chemical characteristics including high solubility in water has been increased, resulting in its release into the water resources. On other hand, waste activated sludge derived from municipal wastewater treatment plant (MWTP) contains high amount of carbon. Therefore, this study aimed to provide the activated carbon via sludge ...
background: using the sludge as fertilizer on farms is one of the options to dispose it, which due to its variety of pathogenic microorganisms, it may cause a wide range of bacterial and parasitic diseases in human and livestock. the purpose of this study is to investigate the feasibility of using dried sludge produced in municipal wastewater treatment processes to fertilize agricultural lands ...
combined electrochemical and biological treatment for pesticide degradation – application to phosmet
the aim of this study was to determine the feasibility of coupling an electrochemical process with a biological treatment in order to degrade phosmet, an organophosphorous pesticide. the absence of biodegradability of phosmet by pseudomonas fluorescens and activated sludge was verified in our operational conditions. so, a conventional biological treatment is not appropriate for phosmet polluted...
Organic fraction of solid waste, which upon degradation produces foul smell and generates pathogens, if not properly managed. Composting is not a method of waste disposal but it is a method of waste recycling and used for agricultural purposes. An integrated approach of composting methodology was tested for municipal solid waste management. Solid waste first was composted and after 22 days, was...
The adsorption of Cu, Cd, Ni, Zn, and Cr from synthetic solutions on powdered activated carbon (PAC), activated sludge, and dried sludge were investigated under laboratory conditions to assess its ability to remove heavy metals. The adsorption efficiency increased rapidly within the first 30 min and then slowed down as it approached a steady state after 5 h of contact time. The results showed t...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید