The design and measured results of a single-substrate transceiver module suitable for 76–77-GHz pulsed-Doppler radar applications are presented. Emphasis on ease of manufacture and cost reduction of commercial millimeter-wave systems is employed throughout as a design parameter. The importance of using predictive modeling techniques in understanding the robustness of the circuit design is stres...

The dual band microstrip antenna is realized by placing the open circuit stub or by cutting the slot inside the patch. The compact microstrip antenna is realized by placing the shorting post or plate along the zero field line at the fundamental mode of the patch. In this paper, a compact variation of equilateral triangular microstrip antenna, a shorted 600 sectoral microstrip antenna is discuss...

Many kinds of microstrip array antennas have been developed in the millimeter-wave band. In order to avoid feeding loss and the decrease of antenna gain by beam shift due to frequency changes, center-fed array antennas are advantageous. In this case, the element spacing around the feeding circuit of the transition from the waveguide to two microstrip lines is larger than one wavelength. Therefo...

Ultra−WideBand (UWB) technology was approved by the Federal Communications Commission (FCC) in February 2002 (FCC, 2002). According to the FCC regulations, the frequency band from 3.1 to 10.6 GHz can be used for short−range and high speed wireless communications systems. This recent allocation of a very wide spectrum of frequencies for the devices uses, with effective isotropic radiated power (...

In this Letter, a dumbbell-shaped patch loaded slotline(PLS) is proposed. Like the conventional defected ground structure(DGS) for a microstrip line, we show that the proposed PLS can provide a wide bandstop characteristic in some frequency bands with only one or small number of unit cells. Also, the equivalent circuit model for a unit section is derived from the analysis of the field distribut...

A miniaturized self-matched negative group delay (NGD) microwave circuit without the need for external matching networks is proposed. The NGD circuit is based on a modified parallel-type RLC resonator, in which lumped elements (capacitors and inductors) are implemented by microstrip gaps and high-impedance and short-circuited microstrip lines. To verify the design concept, an NGD circuit with t...

In this paper, a microstrip transmission line combined with a new U-headed dumb-bell defected ground structure (DGS) is investigated. The proposed DGS of two U-shape slots connected by a thin transverse slot is placed in the ground plane of a microstrip line. A finite cutoff frequency and attenuation pole is observed and thus, the equivalent circuit of the DGS unit can be represented by a paral...