Abstract The article presents the possibility of recovering nickel from waste produced as a result wastewater neutralization during electrochemical surface treatment metals. Leaching sludge with concentrated hydrochloric acid enabled metals contained in precipitate to solution efficiency 74.4% (Se) 100% (Zn). content elements was determined using ICP-OES method. next step precipitation obtained...

Alternate cycling of sludge in aerobic, anoxic, and anaerobic regimes is a promising strategy that can reduce the sludge yield of conventional activated sludge (CAS) by up to 50% with potentially lower capital and operating cost than physical- and/or chemical-based sludge minimisation techniques. The mechanisms responsible for reducing sludge yield include alterations to cellular metabolism and...

Abstract Wastewater containing cobalt and copper comprised of plating wash water, plant equipment cooling water is generated in the electroplating industry. These metals can be detrimental to humans, animals, plants, environment. Thus, it necessary treat wastewater remove these toxic metals. Carbonate hydroxide precipitation were utilized for removal Co (II) Cu from synthetic by jar tests this ...

The literature on reduction of excess sludge production by ozonation is summarized. Two sequencing batch reactor experiments where sludge is ozonated for this purpose are performed. The purpose of these is to evaluate the prospects of using ozonation to reduce excess sludge production in two different kinds of sludge. Urban sewage sludge is used in the first, and paper mill sludge in the second...

background: the entrance of toxic compounds into wastewater treatment plants (wwtps) can induce disorder in their biological units. therefore, it is necessary to determine the sources of toxic wastewaters. in this study, the toxicity of the wastewater of 3 metal plating industries was assessed using sequencing batch reactor (sbr) bacteria. methods: to obtain the 1-1000 ml/l concentrations, the ...

The main objective of this study was to investigate the rheology of mixed primary and secondary sludge and its dependency on solid content and temperature. Results of this study showed that the temperature and solid concentration are critical parameters affecting the mixed sludge rheology. It was found that the yield stress increases with an increase in the sludge solid content and decreases wi...

To understand the diversity and abundance of antibiotic resistance genes (ARGs) in pharmaceutical wastewater treatment bioreactors, the ARGs in sludge from two full-scale pharmaceutical wastewater treatment plants (PWWTPs) were investigated and compared with sludge samples from three sewage treatment plants (STPs) using metagenomic approach. The results showed that the ARG abundances in PWWTP s...

The following sludge reduction alternatives were tested in wastewater biological reactors: oxic-settling-anaerobic (OSA-process); ultrasonic disintegration (UD); chlorination (CH); 3,3',4',5tetrachlorosalicylanilide (TCS); and folic acid (FA). Compared to the control system, UD reduced 55% of the sludge production, and greater substrate and nutrient removal efficiency was achieved. CH worsened ...

Sludge minimization by thermal treatment within activated sludge process was investigated at pilot scale. A 90°C treatment was set up in the return activated sludge loop. When keeping apparent sludge age at 15 days, 90°C treatment decreased sludge production by 30.4%. However, effluent quality was altered. A sludge minimization ASM1 based model was set up and calibrated against experimental dat...

Extracellular polymeric substances (EPS) play important roles in regulating the dewaterability of sludge. This study sought to elucidate the influence of EPS on the dewaterability of sludge during bioleaching process. Results showed that, in bioleaching system with the co-inoculation of Acidithiobacillus thiooxidans TS6 and Acidithiobacillus ferrooxidans LX5 (A. t+A. f system), the capillary su...