When a natural gas pipeline ruptures, the adjacent upstream and downstream automatic control valves (ACV) should close quickly to prevent leakage or explosion. The differential pressure set point (DPS) at each valve location is the main criteria for value setting in ACV actions. If the DPS is not properly adjusted, the ACV may mistakenly close or it may not take any actions at a proper ti...

the pressure drop of refrigerant r-134a flow boiling inside a horizontal tube has been investigated experimentally. the test set-up which was used in this investigation is a well instrumented vapor compression refrigeration system. these instruments are thermocouples, flow meter, pressure gauges and the pressure drop measuring apparatus. this system consisted of three electrically heated evapor...

The premise of this work is the development and application of a new methodology to forecast production data in unconventional reservoirs where variable rate and pressure drop data are typically observed throughout production. Decline curve analysis techniques for the estimation of ultimate recovery (EUR) require the constant bottomhole pressure condition during the producing life of the well —...

The esti mati on of the functions that descri be the shear stress and the pressure drop across the short orifice die as a function of shear rate at different mean pressures for linear-low-density polyethylene copolymer (LLDPE) at 190oC is obtained using Genetic Programmi ng (GP) . The GP has been running base d on e xpe rimental data in two cases; shear stress and pressure drop at differe nt me...

In this study, two-dimensional pulsating unsteady flow of nanofluid through a rectangular channel with isothermal walls is investigated numerically. The set of resultant algebraic equations is solved simultaneously using SIMPLE algorithm to obtain the velocity and pressure distribution within the channel. The effects of several parameters, such as volume fraction of different nanoparticles, Rey...

in the present study the effect of curvature ratio and coil pitch for tio2/water nanofluid laminar flow on heat transfer behavior and pressure drop through helical coils with different geometries was investigated experimentally. the tio2/water nanofluids at 0.25% to 2% particle volume concentrations have been prepared by using a two-step method. the experiments were performed for coils with cur...

KATAPAK-S is a type of structured catalytic packing, which is used in reactive distillation processes. The dry pressure drop characteristic (the pressure drop in the absence of liquid flow) is of significant importance for the investigation of process hydrodynamics. In this paper, the dry pressure drop within the catalyst packed channels of KATAPAK-S has been investigated using Computational Fl...

Hydrolysed polyacrylamide (HPAM) mother liquor is mainly used to extract oil. The HPAM solution is needed to filter the impurity using a bag filter before it is injected into the oil well. Therefore, the pressure drop of HPAM mother liquor must be less than 0.02 MPa in the processing of impurity filtration. The influence factors on pressure drop need to be researched. In this work, the computat...

The pressure drop of refrigerant R-134a flow boiling inside a horizontal tube has been investigated experimentally. The test set-up which was used in this investigation is a well instrumented vapor compression refrigeration system. These instruments are thermocouples, flow meter, pressure gauges and the pressure drop measuring apparatus. This system consisted of three electrically heated evapor...

brass ferrules have been used as packing in a laboratory- scale glass distillation column approaching pilot plant size because of their availability in all sizes and low cost. the available size range is such that these ferrules could also be used in industry and the results of this study could be scaled up. the performance of the new packing has been compared with the performance of glass pack...