Reinforced concrete stair slabs with mid landings i.e. Dog-legged shaped are conventionally designed as per specifications of standard codes of practices which guide about the effective span according to the varying support conditions. Presently, the behavior of such slabs has been investigated using Finite Element method. A single flight stair slab with landings on both sides and supported at ...

Data collected from shake table tests of two, approximately one-third scale, two story flat plate frames utilizing shear reinforcement, as well as data from prior tests, were evaluated to assess the inter-story drift ratios when punching failures occur for reinforced concrete and post-tensioned slab-column connections with and without shear reinforcement. The drift ratios at punching for the sh...

Steel fiber reinforced concrete (SFRC) is used for slabs on grade such as pavements, industrial floors, airport runways, since it exhibits excellent isotropic mechanical properties. When mixing the fibers with the fresh concrete, care is taken to obtain a uniform distribution and a random orientation of the fibers. The strength of this concrete primarily depends on the fiber content, hence it i...

The total substitution of traditional reinforcement in the form steel bars by fibres can be mainly found elements with favourable boundary conditions and subjected to low-moderate load levels. However, rigorous study fibre reinforced concrete (FRC) its potential fields application over last decades permitted this material face structural greater responsibility terms integrity mechanical capacit...

In order to study the basic mechanical property of the new honeycombed-core girderless floor in cast-in-place reinforced concrete, and similarities and differences of the structural performance compared with traditional floor, we carried out the destructive stage loading test on large-scale corner columns supported reinforced concrete honeycombed-core girderless floor. And the thesis conducted ...

The vibratory behavior of a lab facility located in Building 401 of the Advanced Photon Source site at Argonne National Laboratory is summarized. Measurements of ambient vibration indicate that acceptable displacement levels are usually maintained (rms value below 0.1 microns) for the measured frequency range, above 0.2 Hz. An exception occurs when strong wind conditions excite a horizontal bui...

Link slabs designed for macroscopically crack free concrete bridge decks system were experimentally tested. The property requirements of the link slab material were considered. Special focus was placed on the fatigue and durability performance. Introduction of a ductile Engineered Cementitious Composite (ECC) material is proposed for its ability to control crack width and to exhibit high ductil...