Tribology of SU-8 polymer is increasingly relevant due to bursting use of this material in a variety of applications. This study is directed towards introduction and investigation of a novel self-lubricating composite of an ionic liquid (IL) in SU-8. The new material can be utilized for fabrication of lubricating polymer coating with tunable surface properties or SU8-made elements for microelec...

The paper is devoted to one of the most important problems increasing wear resistance tribosystems due application low-melting metal and porous coatings on tribocontact surfaces. asymptotic self-similar solution for zero first approximation was found based true viscous fluid flow equation “thin layer”, equations continuity, an describing a lubricant in body surface coating bearing ring; profile...

In this study, a non-destructive testing method for crack defects of self-lubricating sliding bearing coating based on terahertz time-domain spectroscopy was proposed. The materials were revealed to have good penetration and characteristic response in the band through experiments. To solve problem difficulty signal feature extraction caused by overlap, broad learning system used classify predic...

Considering the excellent solubility of pyrrolidone ring organic compounds, the synthesized N(trimethoxysilyl) propyl-N-methyl-2-pyrrolidone chlorides was tethered onto titanium dioxide (TiO2) nanoparticles to improve dispersion of TiO2, and then polyethylene oxide (PEO) oligomer through ion exchange embraced the tethered TiO2 to obtain a novel self-suspended hairy TiO2 nanomaterials without an...

CrN–Ag composite films, 2.5–4 Am thick, were deposited by reactive magnetron sputtering on Si and stainless steel substrates in a 0.4 Pa pure nitrogen atmosphere at 500 -C. The layer composition was controlled by the relative power to 7.5-cm-diameter Ag and Cr targets to be 0, 3, 12, and 22 at.% Ag. The layers exhibit a dense columnar microstructure where the Ag is homogeneously distributed in ...

Lubricating greases are special lubricants with a wide range of application. The tribologically stressed grease is used as tribological system and finally modeled as an open thermodynamic system. This study investigated the phenomenon of self-optimization and applied to the process of shearing a grease. The conditions for self-optimization and the consequences of created dissipative structures ...

Abstract—In this paper, the dynamic characteristics of a threelobe journal bearing lubricated with micropolar fluids are determined by the linear stability theory. Lubricating oil containing additives and contaminants is modelled as micropolar fluid. The modified Reynolds equation is obtained using the micropolar lubrication theory .The finite difference technique has been used to determine the...

Preliminary note The occurrence of working irregularities in journal bearing such as loss of geometry correctness, sudden failure of lubrication, overloading, etc., requires that serious damage of journal bearings have to be overcome in a short period of time. In such cases, it is important that the applied combinations of materials and lubricants do not have a tendency to seizure. Such critica...

Lubricating space mechanisms are a challenge. Lubrication must be sustained in different environments, for very long period of time, and without any maintenance possible. This study focuses on the self-lubricating composite used double transfer lubrication ball bearing. Ball/races contacts lubricated via materials from cage that is made composite. A dedicated tribometer has been designed study....