Reported silica aerogels have a thermal conductivity as low as 15 mW/mK. The fragility of silica aerogels, however, makes them impractical for structural applications. The purpose of the study is to improve the ductility of aerogels while retain the low thermal conductivity of silica aerogels. We have established a new synthesis route, a 3-step sol-gel processing method. The method provides bet...

This work is devoted to the application of hydrophobic silica based aerogels and xerogels for the removal of three toxic organic compounds from aqueous solutions. These materials were tested and characterized regarding their morphology, particle size distribution, surface area and porous structure. The equilibrium tests were carried out at different adsorbate concentrations and the experimental...

G. Lawes,1 S. C. J. Kingsley,1,* N. Mulders,2 and J. M. Parpia1 1Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, New York 2Department of Physics and Astronomy, University of Delaware, Newark, Delaware (Received 15 December 1999) We have investigated the superfluid transition of 3He in different samples of silica aerogel. By comparing new measurements on a 99.5% sample ...

Introduction: The hypervelocity impacts of comet particles at 6.1 km/s have left tracks in the Stardust aerogel. The terminal particles are usually coarse grained minerals but abundant material is also present along the track walls as illustrated by synchrotron X-rays fluorescence spectroscopy [1]. This configuration suggests that the Wild 2 particles are made of poorly cohesive assemblages tha...

A torsional oscillator has been used to study the flow of liquid 4He through silica aerogel. The tortuosity and dissipation of the flow in the fractal aerogel environment has been measured, for both capillary condensed films and a fully saturated cell. The scaling of tortuosity as a function of filling fraction has been investigated. We compare the results of our 88%-porous aerogel to a 92%-por...

Due to high surface area, low density, open pore structure and excellent insulation properties aerogels were intensively investigated in the past decades for diverse range of applications. The state of the art of aerogel production by supercritical drying is to produce monolithic aerogel, where the sol is aged in molds and dried by extraction with supercritical CO2. Aerogels in form of spherica...

Polymer aerogels are a promising, non-brittle alternative to silica aerogel, but limited by their very poor high-temperature stability. Polyimide is widely known for its high heat-resistance, however, degree of volume shrinkage common polyimide after exposure temperatures above 200 °C. Here, we present the aerogel-in-aerogel composites that comprise aerogel grains with nanoparticulate microstru...

In the present study, silica aerogel- egg shell was synthesized for dye removal of colored wastewater. The nano composite structure was characterized by Fourier transform infrared spectra FTIR and scanning electron microscope SEM.The ability of nano composite absorption was assessed for removal basic violet 16BV16 dye from aqueous solutions and was compared with two other adsorbents such as egg...

• Comprehensive review of all approaches used to assemble aerogel-fiber materials. “In situ sol-gel” and “via pre-formed aerogel” are described evaluated. Enhanced mechanical/physical properties obtained while keeping low thermal conductivity. An overview the market future research trends identified. Silica aerogels have a unique structure that makes them promising materials for variable applic...