ceramic ultrafiltration membranes are considered as an alternative for the treatment of both stable water-in-oil and oil-in-water emulsions proved to be more effective in comparison with other conventional techniques. in this study, symmetric macro-porous ceramic membranes are prepared through dry pressing of α-alumina powder and the addition of various binders including poly (vinyl alcohol). t...

Two materials were prepared with composition PbMg0.3Nb0.6Zr0.1O3 (PMNZ/10) and PbMg0.32Nb0.65Zr0.03O3 (PMNZ/3). Slight modifications in lead oxide content of these materials were made to study its influence on the sintering properties. The stoichiometric PMNZ/3 gave the best results. It has a sintering temperature as low as 900°C and a relative dielectric constant of 10 000 at room temperature.

In this study, a combustion synthesized AlN powder was sintered using microwave as heating source. The microwave was 2.45 GHz and the sintering process was carried out in a single-mode cavity. The sintering temperature was between 1800°C and 2000°C with a power ranging from 400 to 700W. The as-synthesized AlN was ground to under 2μm and yttria was used as sintering aid. The effects of the amoun...

Prealloyed powders usually melt over a range of temperatures. This feature is useful in performing supersolidus liquid phase sintering, where liquid forms inside the particles when heated just over the solidus temperature. Densification by supersolidus liquid phase sintering is sensitive to time-temperatures. A major difficulty arises when a narrow temperature range exists between densification...

Clathrate hydrates have recently received attention as novel storage and transportation materials for natural gases or hydrogen. These hydrates are treated as powders or particles, and moderate storage temperatures (around 253 K) are set for economic reasons. Thus, it is necessary to consider the sintering of hydrate particles for their easy handling because the hydrates have a framework simila...

In this study, mechanically alloyed Al 2024 powder is densified by conventional sintering and by equal channel angular pressing (ECAP) with and without back pressure. The powder was encapsulated in an aluminium can for consolidation through ECAP. The properties obtained in the compacts by conventional sintering route and by ECAP are compared. The effect of conventional sintering and ECAP on con...

Nanoparticles have been an area of active research in recent years due to their properties, which can be greatly different from the bulk. In this work, we study the sintering of TiO2 nanoparticles using molecular dynamics simulations. Such sintering occurs in flame reactors where nanotitania is prepared via the chloride process. Decrease in free energy due to reduction in surface area is the ma...

The microstructure, magnetic and electrical transport properties of La0.67Sr0.33MnO3/Nd0.67Sr0.33MnO3 composites are studied as a function of sintering temperature. At 900 ◦C, the intergrain exchange couplings between the adjacent particles give rise to an increase in resistance. Raising the sintering temperature induces the formation of an interfacial phase near the La0.67Sr0.33MnO3 and Nd0.67...

Polycrystalline samples of Lead free (K0.5Na0.5)1−x(Li)x(Sb)x(Nb)1−xO3 ceramics with nominal compositions (x = 0.040 to 0.060) have been prepared by high temperature solid state reaction technique. X-ray diffraction (XRD) pattern shows that the crystal structure transforms from orthorhombic to tetragonal as Li and Sb content increases. Normal sintering process yield compounds with density ~98.2...

The laser sintering process of multi-component powder W/Cu is simulated by ANSYS software based on the factors of radiation, convection and thermal physical parameters on temperature. The laser power and scanning velocity which are the key process parameters to affect directly in sintering molding are studied in paper. The results show that when the scanning velocity is constant, the sintering ...