High Speed Steel (HSS) specimen surfaces were coated with AlCrN and AlTiN via Physical Vapor Deposition (PVD) method. Then, the wear performances of film coatings so produced investigated by using different abrasive types particle sizes. During micro-abrasion tests, 0.5, 1 1.5 N loads applied for periods 60 180 seconds. loss increased increasing SiC Al2O3 size. Micro-grooving micro-rolling obse...

In order to better understand the role of the uid behavior in CMP, we measured slurry transport beneath a glass wafer. We quanti ed the slurry transport using Residence Time Distribution techniques and two measures of slurry transport e ciency de ned as the percentage of new slurry beneath a wafer. Slurry transport e ciency depended on platen speed, ow rate, and the conditioning method. We foun...

OBJECTIVE To evaluate the relative abrasivity of different toothpastes and polishing pastes both qualitatively and quantitatively. MATERIALS AND METHODS Acrylic plates were exposed to brushing in a brushing machine with a toothpaste/water slurry for 1 and 6 h. Twelve different toothpastes were used and also four different polishing pastes. The results were evaluated using a profilometer after...

The aim of the study was to compare surface loss values after erosion-abrasion cycles obtained with modified surface microhardness measurement (mSMH), focus variation 3D microscopy (FVM) and contact stylus profilometry (CSP). We cut human molars into buccal and lingual halves, embedded them in resin and ground 200 μm of enamel away. The resulting surfaces were polished. To maintain a reference ...

The distribution of moisture, degradable C, and N after direct injection of slurry can affect the turnover and plant availability of slurry N. This study examined effects of injection method, soil conditions, and slurry properties on the infiltration of several slurry components under practical conditions. The water retention capacity of 22 pig and cattle slurries was quantified by dialysis at ...

Abrasion-resistant materials have attracted great attention for their broad applications in industry, biomedicine and military. However, the development of abrasion-resistant materials that have with unique features such as being lightweight and flexible remains a great challenge in order to satisfy unmet demands. The outstanding performance of natural abrasion-resistant materials motivates the...

This research was conducted to develop flowable slurry containing fibrous residuals from pulp and paper mills. Two types of flowable slurry containing ASTM Class C fly ash were produced: fly ash slurry and sandy slurry. Often, the fly ash slurry made without fibrous residuals showed a tendency to set rapidly, and become unworkable. When the cement-to-fly ash ratio was increased to extend the ti...

Natural soiling and the subsequent requisite cleaning of photovoltaic (PV) modules result in abrasion damage to cover glass. The durability front glass has important economic consequences, including determining use anti-reflective and/or anti-soiling coatings as well method frequency operational maintenance (cleaning). Artificial linear brush using Nylon 6/12 bristles was therefore examined exp...

BACKGROUND Excessive shoe heel abrasion is of concern to patients and shoe manufacturers, but little scientific information is available about this feature and its possible causes. The purpose of this study was to relate this phenomenon with biomechanical factors that could predispose to shoe heel abrasion. METHODS Ninety-seven recruits (median age 25) were enrolled in this study. Shoe abrasi...