the steady state effect of vertical fins is assessed on a photovoltaic/thermal solar air heater having a double pass configuration in which fins are placed in the lower channel perpendicular to the direction ofair flow. air passes through the upper channel of the air heater and before passing in the opposite direction through the lower channel. the effects of design, climatic and operating para...

Abstract: This paper proposes the application of time and spatial partition heating to a solar water heating system. The heating effect and system performance were analyzed under the continuous and whole space heating and time and spatial partition heating using TRNSYS. The results were validated by comparing with the test results of the demonstration building. Compared to continuous and whole ...

Solar heating is one of the important utilities of solar energy both in domestic and industrial sectors. Evacuated tube heaters are a commonly used technology for domestic water heating. However, increasing cost of copper and nickel has resulted in huge initial cost for these types of heaters. Utilizing solar energy more economically for domestic use requires new concept which has low initial a...

many research studies have been performed on forced convection (active) solar dryers for fruit and vegetables. a short survey of these showed that applying the forced convection solar dryer not only significantly reduced the drying time but also resulted in many improvements in the quality of the dried products. active indirect and mixed-mode thin layer solar drying experiments were conducted o...

Solar energy is used for solar water heater in domestic and industrial purpose. Pulsating heat pipe is a fast responding, flexible and high performance thermal conducting device. The CLPHP system described in this study relies on the natural forces of gravity and capillary action and does not require an external power source. The flat plate collector consisted of a 2 mm thick sheet of Aluminum ...

This paper reports the development of a computer approach for evaluating the general performance of stand-alone wind/photovoltaic generating systems. Simple models for different system components are developed, integrated, and used to predict the behavior of generating systems based on available wind/solar and load data. The model is useful for evaluating the performance of stand-alone generati...

outdoor experiments on a once-through single glazed solar air heater with perforated metal absorber plate were conducted to determine the practical effect of absorber plate porosity as well as suction air flow rate on the collector thermal efficiency and its total pressure drop. three aluminum absorber plates were made perforated by drilling circular holes with different diameter/pitch ratios i...

The shape of a solar collector is an important factor in solar-to-thermal energy conversion. Conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. Flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. The present study is an experimentally investigated of the performance of the solar coni...

the shape of a solar collector is an important factor in solar-to-thermal energy conversion. conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. the present study is an experimentally investigated of the performance of the solar coni...