A large eddy simulation (LES) model was developed to simulate the combustion process in a spark-assisted homogeneous charge compression ignition (SACI) engine. First, an ignition and flame propagation model based on a reaction progress variable is presented. The reaction progress variable is defined based on the normalized cumulative heat release. Transport equation for the progress variable is...

in Spark Ignition Engines by Michael G. Norris B. S., Mechanical Engineering Oregon State University, 1985 S.M., Mechanical Engineering Massachusetts Institute of Technology, 1991 Submitted to the Department of Mechanical Engineering in Partial Fulfillment of the Requirements for the Degrees of Doctor of Philosophy at the Massachusetts Institute of Technology; September 1995 © 1995 Massachusett...

The concept of minimum ignition energy (MIE) has traditionally formed the basis for studying ignition hazards of fuels. However, the viewpoint of ignition as a statistical phenomenon appears to be more consistent with the inherent variability in engineering test data. We have developed a very low-energy capacitive spark ignition system to produce short sparks with fixed lengths of 1 to 2 mm, an...

Spark-assisted homogeneous charge compression ignition (HCCI) combustion may be a method to improve the operation of HCCI engines. In the current study, the impact of spark assist on the fundamental properties of ignition and combustion was investigated in a single cylinder, optically-accessible research engine. Early port fuel injection and air preheating were used with indolene fuel in the st...

This thesis addresses the problem of combustion control for automotive engines. A method is proposed to complement existing controllers, which use lookup tables based on steady-state operation. During transients, the new control method adjusts fast control variables (ignition or injection time) to compensate for deviations in the cylinder initial conditions from their optimal values due to the ...

This thesis addresses the problem of combustion control for automotive engines. A method is proposed to complement existing controllers, which use lookup tables based on steady-state operation. During transients, the new control method adjusts fast control variables (ignition or injection time) to compensate for deviations in the cylinder initial conditions from their optimal values due to the ...

gas motion within the cylinder is one of the major factors that control the combustion process in spark ignition engine. it also has significant impact on heat transfer. both the bulk gas motion and the turbulence characteristics of the flow are important and governing the overall behavior of the flow. an arrangement for obtaining a stratified charge, using port injection, is proposed for a cur...