Opadry® II 1 Influence of Film Coating Process Parameters on the Gloss of Tablets Coated with Pigmented Aqueous Film Coating Formulations PURPOSE A common practice for enhancing the gloss of coated tablets is the application of a clear top-coat after applying a pigmented coating layer. In a recent study, substantial increases in tablet gloss were achieved using this multiple step approach.1 It ...

the corrosion protection of mild steel by a newly developed epoxy-based coating system containing inherently conducting nanopolyaniline-clay as a nanoadditive has been studied. polyaniline-clay anticorrosion nanoadditive (pcna) was obtained by the direct mixing method of nanopolyaniline (0.03 wt.%) and organo-modified clay (3 wt.%) at atmospheric pressure, and xrd technique was used to study d-...

A black mask (BM) is a layer used to improve the display quality by suppressing light leakage. In general, the BM is formed by a photolithography process. In this study, a novel technique for the fabrication of a quasi-black mask (q-BM) is proposed; the q-BM was composed of vertical and hybrid orientation areas, patterned by a separation coating technique using an electro-spray deposition metho...

T his inspection by the Occupational Safety and Health Administration (OSHA) reports on an overexposure to methylene bisphenyl isocyanate (MDI) during the spray application of a protective coating for truck beds. The inspection was conducted at an autobody repair shop and collision center that also operated a spray-on truck bed coating operation. The investigation was initiated as a complaint i...

Thermal spray in general, plasma spray in particular, is a highly complex process with numerous interacting variables associated with generation of the spray stream, deposit formation dynamics, and the resultant property linkages. Compounding this variability further are both the spatial (different booths and different locations) and temporal (process start-stops, hardware degradation, operator...

Pure and 10 wt% 80Al2O3-20TiO2 reinforced hydroxyapatite coatings were successfully deposited on Ti6Al4V substrate by plasma spray technique for bio medical applications. Post coating heat treatment was carried out to study the effect of heat treatment on improvement in micro structure and mechanical properties of coatings. Coating was characterized by SEM/EDAX and XRD analysis. Positive impact...

The quartz-crystal microbalance is a sensitive and versatile tool for measuring adsorption of a variety of compounds (e.g. small molecules, polymers, biomolecules, nanoparticles and cells) to surfaces. While the technique has traditionally been used for measuring adsorption to flat surfaces and thin ridged films, it can also be extended to study adsorption to nanoparticle surfaces when the nano...

An AlCoCrCuFeNi high-entropy alloy (HEA) coating was fabricated on a pure magnesium substrate using a two-step method, involving plasma spray processing and laser re-melting. After laser re-melting, the microporosity present in the as-sprayed coating was eliminated, and a dense surface layer was obtained. The microstructure of the laser-remelted layer exhibits an epitaxial growth of columnar de...

Organic coating strategies for corrosion protection with inherently conducting polymers have become important because of restriction on the use f heavy metals and chromates in coatings due to their environmental problems. This work presents the synthesis of polyaniline–TiO2 composites PTC) and the corrosion protection behaviour of PTC containing coating on steel. PTC was prepared by chemical ox...

This paper presents three coating methods of photoresist, spin, spray and electrodeposition (ED) on large topography surfaces. Characteristics of each method as well as its advantage and disadvantages are outlined. A comparison is made to point out the most suitable coating method in terms of complexity, costs and type of