A novel technique to estimate and model rotorbody parameters of a large steam turbine-generator from real time disturbance data is presented. For each set of disturbance data collected at different operating conditions, the rotor body parameters of the generator are estimated using an Output Error Method (OEM). Artificial neural network (ANN) based estimators are later used to model the non-lin...

Fault diagnosis is an important task for the normal operation and maintenance of equipment. In many real situations, the diagnosis data cannot provide deterministic values and are usually imprecise or uncertain. Thus, interval-valued fuzzy sets (IVFSs) are very suitable for expressing imprecise or uncertain fault information in real problems. However, existing literature scarcely deals with fau...

Abstract The paper deals with the description and simulation verification of one of possible methods to control of multivariable control loops. In this case, the so called main controllers, binding members and correction members are used. The proposed method of control combines classical way to ensure of autonomy of control loop via binding members and the use of the method of single-variable b...

In this study, oil palm mesocarp fiber (OPMF) was treated with superheated steam (SHS) in order to modify its characteristics for biocomposite applications. Treatment was conducted at temperatures 190-230 °C for 1, 2 and 3 h. SHS-treated OPMF was evaluated for its chemical composition, thermal stability, morphology and crystallinity. OPMF treated at 230 °C exhibited lower hemicellulose content ...

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...

A total of 3,632 crossbred steers were used in 3 separate randomized complete-block designed finishing experiments. Data from Exp. 1 were analyzed separately whereas data were combined for Exp. 2 and 3, based on corn processing method used [Exp.1 = equal combination of dry-rolled and high-moisture (DRC:HMC); Exp. 2 and 3 = steam-flaked (SFC)]. Steers were fed 1 of 5 treatments to evaluate the e...

The Maroni basin, an isolated region delineating the border between Suriname and French Guiana has been affected by the human immunodeficiency virus (HIV) epidemic 10 years after coastal French Guiana. However, the rise in HIV prevalence was sharp, exceeding 1% within 10 years. The aim of the present study is to compare, using the first quantitative data from the general population in remote vi...

Amniocentesis, a procedure which can detect during pregnancy whether or not the fetus will develop into a mongol or one affected by other serious chromosomal defects, if given to all pregnant women aged 40 and over, would save both human suffering and economic loss to the community. The procedure is not at present widely used for various reasons, not all of them medical, and, if the test result...

In this paper, proportional-integral-derivative (PID) control gains are automatically tuned by using a model predictive control (MPC) method. The MPC has received much attention as a powerful tool for the control of industrial process systems. An MPC-based PID controller can be derived from the second-order linear model of a process. The steam generator is usually described by the well-known fo...

Fast reaction times and high discharge rates make steam accumulators a promising option for compensation of fast transients in insolation for solarthermal systems using steam as working medium. Using the volume of components like separator drums or heat exchangers for storage of pressurized hot water is a cost-effective approach to integrate buffer storage capacity. While the basic steam accumu...