Pumping station Pumping station 1 Filtered and chlorinated 1 0.5 27 + – From plant B to pumping station, 17.5 km Pumping station 2 Filtered and chlorinated 1 >2.5 26 – – From pumping station site 1 to pumping station site 2, 3.5 km Catchment areas: consumer households Household 1, underground storage tank Filtered and chlorinated 1 0.5 29 + – From pumping station site 2 to household 1, 2.03 km ...

By dynamically measuring solar storage&& temperature(s), the solar storage tank effectively becomes a dynamic calorimeter to measure the energy flows in a solar system. The energy flows include solar loop gain, tank losses, and potentially draw extraction. With one-channel temperature loggers storing data over several days to several weeks, this approach provides low-cost, modest-accuracy perfo...

The novel ultrasonic NDT technique based on application of long range guided waves is proposed for detection of defects in a storage tank floor. The technique needs access only to the outer edge of the tank floor and do not require emptying and cleaning inside of the tank. The technique has been developed on the basis of the Lamb wave transmission tomography. The propagation of the guided waves...

The heat loss and surface temperature of the top surface and sidewall of large-scale floating roof tank is tested by the heat flow meter and surface temperature method. Based on the test data, the heat loss from the top surface is about twice more than that of the sidewall which means the top surface is the weakest insulation part of the floating roof tank. On the surface, the heat loss profile...

A simple effect one stage ammonia-water absorption cooling system fueled by solar energy is analyzed. The considered system is composed by a parabolic trough collector concentrating solar energy into a tubular receiver for heating water. This is stored in a fully mixed thermal storage tank and used in the vapor generator of the absorption cooling system. Time dependent cooling load is considere...

This study was performed to evaluate the accuracy, validation and applicability of UV spectrophotometer (UV), Ion Chromatography (IC), and Detector tube (DT) methods for measuring ammonia (NH3) concentration in a swine confinement house and swine slurry storage tank. The mean values of NH3 emitted from the house and slurry were 5.333 ppm and 42.192 ppm for the IC method; 4.13 ppm and 36.29 ppm ...

Cylindrical liquid storage tanks are considered as vital structures in industrial complex whose nonlinear dynamic behavior is of crucial importance. Some of these structures around the world have demonstrated poor seismic behavior over the last decades. There are several methods and techniques for rehabilitation and reducing damages in these structures which among them passive control devices, ...

In countries with hot climates, air-conditioning forms a large proportion of annual peak electrical demand, requiring expansion of power plants to meet the peak demand, which goes unused most of the time. Use of well-designed cool storage can offset the peak demand to a large extent. In this study, an air conditioning system with naturally stratified storage tank was designed, constructed and t...

In this paper, a one-port time-domain/frequencydomain based technique using a short-circuited coaxial geometry inserted vertically in a liquid tank is designed and presented as a multi-level storage tank gauge and monitor. For storage tanks of small physical liquid levels, the attenuation inside the coaxial cable sensor may be neglected and both the physical liquid levels and liquid permittivit...