Abstract—In this study, the Compressive strength of concretes made with Ground Granulated Blast furnace Slag (GGBS), Pulverised Fuel Ash (PFA), Rice Husk Ash (RHA) and Waste Glass Powder (WGP) after they were exposed 780C (exposure duration of around 60 minutes) and then allowed to cool down gradually in the furnace for about 280 minutes at water binder ratio of 0.50 was investigated. GGBS, PFA...

Introduction: The heavyweight concretes have been widely used for constructing medical or industrial radiation facilities with photon sources. Materials and Methods: In this study, heavy concretes containing galena (PbS) and several borated minerals are proposed as suitable materials against photons. The shielding properties of 21 galena concretes containing seven borated minerals with three m...

Based upon the statistical distribution of flexural fatigue life data and flexural fatigue strength of the steel fibre reinforced concrete (SFRC) containing blends of limestone powder (LP) and silica fume (SF), the influence of these inserts on the flexural fatigue performance of concretes is probed. Concrete mixes were proportioned to replace 30% cement with these mineral inserts in different ...

The paper presents the results of tests on the effect of the low calcium fly ash (LCFA) addition, in the amounts of: 0% (LCFA-00), 20% (LCFA-20) and 30% (LCFA-30) by weight of cement, on fracture processes in structural concretes. In the course of the experiments, compressive strength of concrete and fracture toughness for: I (tensile), II (in-plane shear) and III (anti-plane shear) models of c...

This study comparably assessed the pozzolanic effect of silica fume (SF) and ground rice husk ash (RHA) as supplementary cementing materials on the properties of blended cement pastes and concretes. A commonly commercial silica fume (SF) and locally-produced rice husk ash (RHA) samples with two finenesses (one with larger size than cement and the other with smaller size than cement) were used i...

Abstract The article presents various methods of heat-resistant materials synthesis on the basis aluminosilicate wastes expanded clay production. Researches have shown that application physical and chemical in course studying claydite dust composition, structure properties makes it possible to define reason thermal parameters increase binders prepared its composition. investigates influence ref...

Municipal solid waste incineration bottom ash was treated with specially designed dry and wet treatment processes, obtaining high quality bottom ash granulate fractions (BGF) suitable for up to 100% replacement of natural gravel in concrete. The wet treatment (using only water for separating and washing) significantly lowers the leaching of e.g. chloride and sulfate, heavy metals (antimony, mol...

The core catcher is arranged in an unattended, unventilated sub-reactor space. It designed to receive molten corium emergencies, and thus the concrete used must be resistant high temperatures without significant loss of strength. During nuclear power plant (NPP) operation, these concretes are subjected considerable radiation exposure, which may also affect their physical–chemical properties. Co...

Sulphates usually affect calcium aluminates in cements. Sulphate ions might have negative effects on cement hydration and it would be a reason of decrease in cement strength. In this study, the effects of Na2SO4 solution on the concretes made from OPC with oil shale ash (OSA) addition (0, 15 and 30%) were investigated. Concretes with 15% OSA gave the lowest value of Length Change Factor (LCF). ...