This study reviews the use of agricultural and agro-processing industry wastes as metal adsorbents from wastewater. Modified materials displayed better adsorption capacity and capability of some was comparable with that of commercial activated carbons and synthetic resins. Agricultural wastes are low-cost adsorbents and can be viable alternatives to activated carbon for treatment of metal-conta...

The main aim of this work was to study the removal efficiency of Pb from synthetic and industrial wastewaters by using biomass fly ashes. The biomass fly ashes were produced in a biomass boiler of a pulp and paper industry. Three concentrations of Pb(2+) were tested in the synthetic wastewater (1, 10 and 1000 mg Pb/L). Moreover, two different wastewaters were collected in an industrial wastewat...

This paper describes a preliminary study of the adsorption of toxic elements from synthetic wastewater in a batch mode. Clay minerals have been highly considered as inexpensive available adsorbents that adapt with the environment due to a special level and a high potential of adsorption. In the present research work, low-cost natural minerals of speiolite from the Iliato mine (located in NE Ir...

The present work was directed toward the successful ability of electerocoagulation to remove color from synthetic and simulated textile effluent by aluminum/iron electrodes. Two representative reactive dyes were selected for the synthetic dye system, a black dye alone and mixed dye (black, blue, red, 1:1:1 vol/vol). Several important operating parameters such as electrode material, initial pH(3...

Alcaligenes faecalis No.4, which is capable of heterotrophic nitrification and aerobic denitrification was used to treat coking wastewater (CW) to remove high-strength of ammonium and phenol. First, the phenol-degrading ability of No.4 was verified and a synthetic medium containing lactate and phenol as carbon sources was subsequently applied to the No.4 culture. Both carbon materials were enti...

The aim of this study was to find optimum dose of ferrous sulphate and hydrogen peroxide in Fenton oxidation process for treatment of dyeing wastewater. Fenton process is the advanced oxidation method used mainly for COD and colour removal. Experiments are done on synthetic wastewater prepared from three different dyes; acidic, disperse and reactive; and also effluent obtained from industry. Th...

In this work, the usefulness of Conductive Diamond Electrochemical Oxidation (CDEO) to degrade caffeine in real urban wastewater matrixes was assessed. The oxidation of actual wastewater intensified with caffeine (from 1 to 100 mg L(-1)) was studied, paying particular attention to the influence of the initial load of caffeine and the differences observed during the treatment of caffeine in synt...

Wastewater discharged from metal-finishing processes usually contains cyanide, a hazardous substance that is used extensively in the surface finishing industry. In the present study, a synthetic solution resembling the contaminated wastewater was chemically treated using ferrous sulfate. This simple one-step process was applied successfully to remove cyanide from metal finishing wastewater. The...

One possible way to address both water and energy shortage issues, the two of major global challenges, is to recover energy and water resource from wastewater. Herein, a novel electrochemical membrane bioreactor (EMBR) was developed to recover energy from wastewater and meantime harvest clean water for reuse. With the help of the microorganisms in the biocatalysis and biodegradation process, ne...