Polymerase chain reaction (PCR) using micromachined structures promises improved temperature uniformity and cycling time together with decreased reagent and sample volumes. Thermal design of these structures will benefit from measurements of the temperature distribution in the reacting liquid. We report measurements of temperature uniformity and time constant in a microfabricated 18-vessel arra...

The growth rate and uniformity of Carbon Nano Tubes (CNTs) based on Chemical Vapor Deposition (CVD) technique is investigated by using a numerical model. In this reactor, inlet gas mixture, including xylene as carbon source and mixture of argon and hydrogen as  carrier gas enters into a horizontal CVD reactor at atmospheric pressure. Based on the gas phase and surface reactions, released carbon...

carbon nanotubes (cnts), nowadays, are one of the important nanomaterials that can be produce with different methods such as chemical vapor deposition (cvd). growing of cnts via cvd method can be influenced by several operating parameters that can affect their quality and quantity. in this article, the effects of inlet gas mixture temperature on cnt’s local growth rate, total production, and le...

Application requirements for avionics are often very strict. For example, the heat sinks of avionics need very good temperature uniformity, but the flow rate of coolant is very restricted. In addition, the use of micro-channels is not recommended due to the potential clogging issue. Considering these design requirements, we will discuss a multiple-objective optimal design method to obtain a goo...

In a comment on our recent letter, Yu first pointed out that there was strong alloying between the Ge dots and Si barrier layers because of the appearance of Si–Ge modes as also observed in SiGe alloys. It is correct that the Ge dot samples reported in our letter have some degrees of alloying due to interdiffusion. This was due to the fact that the samples were grown at a high temperature of 60...

This work presents a comparative analysis of top gate a-IGZO TFTs fabricated on both soda-lime-silica glass and alkali-free borosilicate glass. Low-temperature ALD is selected for the deposition of gate dielectric to minimize a thermal stress. Comparing with TFTs on alkali-free borosilicate glass, TFTs with soda-lime-glass show similar threshold voltage and subthreshold swing, but slightly degr...

Carbon nanotubes (CNTs), nowadays, are one of the important nanomaterials that can be produce with different methods such as chemical vapor deposition (CVD). Growing of CNTs via CVD method can be influenced by several operating parameters that can affect their quality and quantity. In this article, the effects of inlet gas mixture temperature on CNT’s local growth rate, total production, and le...

External quantum efficiency of industrial-grade green InGaN light-emitting diodes (LEDs) has been measured in a wide range of operating currents at various temperatures from 13 K to 300 K. Unlike blue LEDs, the efficiency as a function of current is found to have a multi-peak character, which could not be fitted by a simple ABC-model. This observation correlated with splitting of LED emission s...

The magnitude and uniformity of the hotface temperature greatly affects the life of continuous casting molds, in addition to affecting surface defects in the product, such as longitudinal cracks. In this work, several different designs for the cooling channels of a beam-blank mold are evaluated using two-dimensional finite-element heat conduction models in order to minimize hotface temperature ...