Cryogenically cooled components in infrared instruments designed by Utah State University's Space Dynamics Laboratory traditionally have been mounted on glass-epoxy composite (G-10) cylinders for thermal isolation. Ensuring adequate mechanical stiffness to withstand typical launch loads often compromises the desired thermal isolation and conduction parasitic heat loads become a concern. Beginni...

The effects of accelerated aging on a pigmented elastomer were evaluated by using a weathering chamber. Silastic 44210, a maxillofacial material with proven color and physical property stability, was chosen for pigmentation with 11 maxillofacial pigments. The values of ultimate tensile strength, maximum percent elongation, shear strength, Shore A hardness, and permanent deformation were determi...

45 Abstract— This paper present the development of composite flush door shutter for ecological purpose (eco-composite) using natural fibre like bamboo, jute and their basic mechanical properties. Here, 100 percent indigenous technologies were applied to make flush door shutter of solid core type. Different thermosetting resin adhesives were used as matrix at different stage. The experimental re...

The method described in the present work was assessed through the production of composite materials made of polypropylene reinforced with chemical thermomechanical pulp of hemp core fibers. Composite materials were obtained by extrusion and injection molding, and by the addition of a coupling agent to ensure a good interphase between fiber and matrix. In all cases, the composite materials were ...

Stability assessment of existing dikes build on soft soil generates questions on the available stability calculation techniques and material models. Especially peat behaviour is not easily captured by standard design methods. This has led to disapproval, based on calculations, of dikes that have been in operation for several hundreds of years. To establish the weak points in the stability asses...

The stability of the physical properties of various commercially available maxillofacial prosthetic materials was evaluated with the use of an accelerated aging chamber. The tensile strength, maximum percent elongation, shear strength, tear energy, and Shore A hardness were determined before and after accelerated aging. Results indicate that silicone 44210, a RTV rubber, is a promising elastome...

Sun, Jianzhuo. M.S.A.A., Purdue University, May 2014. Biaxial Shear/Tension Failure Criteria of Spectra single fibers. Major Professor: Weinong Chen. An experimental study was conducted to develop the biaxial failure surface criteria of single Spectra 130d and 100d filaments in a torsion-tension environment. The crosssectional profiles of single Spectra fibers were investigated using scanning e...

This paper presents the effect of geogrid tensile strength by calculating pullout resistance and geogrid-soil interaction mechanism. In order to investigate this interface, a series of pullout tests have been conducted by large scale reformed direct shear test apparatus in both cohesive and granular soils. In numerical, finite difference software FLAC3D has been carried out on experimental test...

In this paper experimentally, the friction-stir welding of the polypropylene sheets with 40% glass fiber has been investigated. Comparison to other welding methods, the strength of the joint is the most important feature in this process. Many parameters such as tool geometry, rotational speed, linear velocity, and tilt angle are very important as input parameters in this type of welding. Theref...

OBJECTIVE Repairing composite restorations may be a more conservative treatment than replacing the entire restoration. The objective of this in vitro study was to determine the best repair method by measuring flexural, diametral tensile, and shear bond strength of repaired composites in which the surfaces were treated with chemical primers (Add & Bond or Silane Bond Enhancer), a bonding agent (...