The stress on a test specimen during tensile testing is generally measured by a strain gauge. This method has some problems in that it would influence the measurement conditions of the tensile test and can evaluate only the position at which the strain gauge is attached. The acoustoelastic method is proposed as a method replacing the strain gauge method. However, an ultrasonic sensor with a pie...

The penetration coefficients (PC) and tensile bond strengths of two pit and fissure sealants and a low viscosity bonding resin were evaluated. The penetration coeftYcients of the resin systems were determined at 22°C. Five determinations were done with each resin. Bonded test specimens were loaded to failure in the tensile mode in an Instron testing macl~’ne. Ten specimens were prepared with ea...

Introduction: The purpose of the presented study was to evaluate the effect of zirconia thickness on the tensile stress of zirconia based all-ceramic restorations. Methods: Twenty zirconia disks with 10mm diameter were prepared in two groups using CAD/CAM system. The thickness of zirconia was 0.5mm in first group and 0.3mm in second group. After sintering, 0.4mm glass ceramic porcelain was appl...

Tensile-shear testing results are influenced not only by the quality of spot welds, but also by the dimensions of testing specimens. Experimental and numerical studies have been conducted on determining critical sizes for tensileshear testing of resistance spot welded specimens. Statistical methods have been employed, from planning stages to the analysis of results, for the purposes of getting ...

in this paper, a new method is proposed for the production of mwcnts/pvc (multi-walled carbon nanotubes/ polyvinyl chloride) nanocomposites. in this method, a spray is used to produce layers of carbon nanotubes within a pvc matrix. various parameters influence the production of the nanocomposite and its mechanical properties. these parameters are studied separately and the effect of each of par...

the creep behavior of basalt fiber reinforced epoxy (bfre) and glass fiber reinforced epoxy (gfre) composites was studied through tensile testing at high temperature. to study the effect of reinforcing epoxy, the micro glass powder (mgp) was added at various volume percentage into the epoxy resin in bfre composites. the initial strain for all the specimens were evaluated and compared with each ...