An experimental setup to determine thermal conductivity and thickness of a gas diffusion layer (GDL) as a function of compression was developed and calibrated. The actual thermal conductivities, based on compressed thickness, of plain Toray TGP-H gas diffusion layer (GDL) at compression pressures of 0.04 to 1.5 MPa and over temperature range of 25 C to 75 C are reported in this paper. The therm...

The conventional gas diffusion layer (GDL) of polymer electrolyte membrane (PEM) fuel cells incorporates a carbon-based substrate, which suffers from electrochemical oxidation as well as mechanical degradation, resulting in reduced durability and performance. In addition, it involves a complex manufacturing process to produce it. The proposed technique aims to resolve both these issues by an ad...

In this paper, the measurement of the viscosity of ZnO in ethylene glycol, propylene glycol, mixture of ethylene glycol and water (60:40 by weight), and a mixture of propylene glycol and water (60:40 by weight) and the thermal conductivity in ethylene glycol and propylene glycol as base fluids in the range of temperature from 25 ºC to 60 ºC are investigated. The results indicate that as the tem...

In this paper, Wavelet Collocation Method has been used to solve nonlinear fin problem with temperature dependent thermal conductivity and heat transfer coefficient. Thermal conductivity of fin materials varies any type so that we consider thermal conductivity as the general function of temperature.  Here we consider three particular cases, where we assume that thermal conductivity is constant,...

The thermal conductivity of superconducting MgB 2 was studied in both the superconducting and normal state region. The latter is almost equally determined by the electronic-and the lattice thermal conductivity. In the superconducting state, however, the lattice thermal conductivity is larger. The electronic thermal conductivity below T c was derived from the experimental data considering the Ba...

~~'he t hermal conductivity of CO 2 has been m.easured in a coaxia l cyl inder cell as a fu nctIO n of pressure over a range of t emperatures from 3.66 to 75.26 °C. P ar Licular attention was given to t he measurement s from 1 to 9 deg C above t he cri tical t emperature at pressures closely spaced to i nclude t he crit ical density. The t hermal co ndu ctivity of CO2(0) near t he cri tical poi...

  Objective: Studies have demonstrates that physical properties of denture base affect patient satisfaction and acceptance. Thermal conductivity is among the most important properties of denture base influencing the sense of taste and gingival health. The conventionally used acrylic resin has a low coefficient of thermal conductivity. This study aimed to improve the thermal conductivity of acry...

This application note highlights percentage level analysis of hydrogen on an Agilent Micro GC using a mixed carrier gas. Hydrogen is typically analyzed with argon carrier gas on a thermal conductivity detector. Argon however, will result in a decreased sensitivity for the other permanent gases. Helium carrier gas is, in most cases, also not a suitable alternative. Mixtures of helium and hydroge...

This study examines the influence of radial thickness on the thermal conductivity of thin metallic wires. While size effects on the electrical conductivity of thin wires have been discussed in the literature, research into size effects on thermal conductivity still requires investigation. At such small length scales, the assumption that the reduced electrical conductivity can be simply related ...

thin bonded films have many applications in antireflection and reflection coating, insulating and conducting films and semiconductor industries. thermal conductivity is one of the most important parameter for power packaging since the thermal resistance of the interconnections is directly related to the heat removal capability and thermal management of the power package. the defects in material...