In corrosion protection study, it is important to develop economically attractive test method for mitigation of corrosion damage of coated structure. Faster predication of protective behavior of any coating is a big challenge for the coating industries. In present work, in-house waterborne anticorrosive coating system was selected for study. The corrosion protection of coating evaluated as per ...

Problems of adherence of thermal protective coatings to aerospace structures have become important with their use on vehicles such as the space shuttle and for jet engine turbine blades. In these structures a dielectric coating which acts as a thermal barrier. is bonded to a conductive substrate. Failure of these coatings to adhere to the substrate can result in catastrophic failure of the vehi...

The sensor characteristics of a coated Fiber Bragg grating (FBG) thermal sensor for cryogenic temperatures depends mainly on the coating materials. The sensitivity of the coated FBG can be improved by enhancing the effective thermal strain transfer between the different layers and the bare FBG. The dual coated FBG’s has a primary layer and the secondary layer. The primary coating acts as an int...

Modern gas turbine hot sections need to be protected from elevated temperature and damaging environments. This protection starts as a typically two layer coating system, the base layer or bond coat (BC) acts as a corrosion barrier and a kind of buffer for the thermal mismatch between the base material and the second top thermally protective layer or Thermal Barrier Coating (TBC). The BC is norm...

Polyol-ester-based carbon black pastes are used to either coat or penetrate flexible graphite, thereby increasing the thermal contact conductance of flexible graphite between copper surfaces. Paste penetration by up to an effective paste thickness (the volume of the penetrated paste divided by the geometric area of the flexible graphite) of 5 lm increases the conductance by up to 350%, 98% and ...

Optical fibers are drawn with resin coatings that protect the glass. In general UV-curable resins are used for the coatings, and in most single-mode (SM) fibers a dualcoating structure is adopted. Each coating layer has an independent function in the protection of the glass. The coating in direct contact with the glass is known as the primary (P) coating, with the role of acting as a buffer aga...

A highly dense Ni59Zr20Ti16Si2Sn3 partial amorphous metallic coating, about 500mm thick, was fabricated by means of HVAF (High Velocity Air Fuel) thermal spraying. Amorphous alloy powders produced by using gas atomization were used for HVAF thermal spraying to produce an amorphous metallic coating. Microstructural investigation showed that crystallization and oxidation occurred during thermal s...

in this paper, a 3d stochastic model has been presented to predict the coating thickness and porosity in a thermal spray coating process. different values of processing parameters were obtained. the model was developed on the basis of prescribed rules in calculating the splat size during the impact of individual droplets on the surface of the substrate. due to the thermal stresses produced duri...

thin bonded films have many applications in antireflection and reflection coating, insulating and conducting films and semiconductor industries. thermal conductivity is one of the most important parameter for power packaging since the thermal resistance of the interconnections is directly related to the heat removal capability and thermal management of the power package. the defects in material...