In this study, the effects cold rolling and annealing parameters during thermomechanical processing of the AISI 201LN stainless steel were investigated. The cast samples were homogenized, hot-rolled and solution-annealed to acquire a suitable microstructure for the subsequent thermomechanical treatment. Unidirectional and transverse multi-pass cold rolling at 25, 0 and -15 °C was carried out to...

A numerical framework based on the generalized finite element method (GFEM) is developed to capture the coupled effects of thermomechanical deformations and thermal gradients on the regression rate of a heterogeneous solid propellant. The thermomechanical formulation is based on a multiplicative split of the deformation gradient and regression of the heterogeneous solid propellant is simulated ...

Duplex stainless steels (DSSS) have a microstructure composed of ferrite and austenite phases that gives them a very good combination of mechanical and corrosion properties. These steels are desirable for many applications in the chemical and petrochemical industries. In the present study, a type of stainless steel was cast, solution annealed at 1200°C for 60 min and then quenched in water. Ini...

The work reports an experimental observation on crystal rotation in a duplex (austenite + ferrite) steel induced by the electropulsing treatment at ambient temperature, while the temperature rising due to ohmic heating in the treatment was negligible. The results demonstrate that electric current pulses are able to dissolve the initial material's texture that has been formed in prior thermomech...

Abstract: In the present study the effect of thermomechanical treatment (cold work and annealing) on the transformation behavior of NiTi shape memory alloys was studied. Differential scanning calorimetry was used to determine transformation temperature and its relation to precipitates and defects. Three alloys including Ti-50.3at.% Ni, Ti-50.5at.% Ni (reclamated orthodontic wires) and 50.6at...

Titanium and its alloys have been used in a broad range of products such as biomedical implants due to their high specific strength, corrosion resistance, biocompatibility. Improvement microstructure mechanical properties commercially pure (CP) titanium is usually performed by cold rolling controlled atmosphere heat treatment. However, this an energy-intensive, expensive, multi-stage process ac...