V.A. Andreyachshenko, Faculty of Nanotechnology and Metallurgy, Karaganda state technical University, Karaganda, Kazakhstan A.B. Naizabekov, Mining and Metallurgy Faculty, Rudny Industrial Institute, Rudny, Kazakhstan In the present research, equal channel angular pressing (ECAP) was conducted. The defectness degree of the alloy for one pass and maximum strain was determined. Ultra fine grained...

The microstructural evolution of Fe–0.2C–5Mn steel during intercritical annealing with holding time for up to 144 hours was examined by TEM and STEM. It was demonstrated by TEM that the martensite lath structure gradually transformed into a lamellar ferrite and austenite duplex structure. The partitioning of manganese from ferrite to austenite was found by STEM. Typical Kurdjumov-Sachs orientat...

In this paper, the production of Al2O3-Mo nano-composites via mechanical milling was investigated. Molybdenum and alumina powders with certain ratios were grounded in a planetary ball mill at different times. XRD technique was used to determine the crystallite size of the milled powders. The microstructure of milled powders was studied using optical and electron microscopes. The crystallite siz...

a review on the microstructural evolution in magnesium alloys during severe plastic deformation waspresented. the challenges deserved to achieve ultrafine/ nanostructured magnesium were discussed.the characteristics of the processed materials are influenced by three main factors, including i)difficult processing at low temperatures, ii) high temperature processing and the occurrence ofdynamic r...

The influence of Mo alloying on the thermal stability of grain size, dislocation density and hardness of ultrafine-grained (UFG) Ni alloys was studied. The UFG microstructure in alloys with low (∼0.3 at.%) and high (∼5 at.%) Mo contents was achieved by high-pressure torsion (HPT) performed for 20 turns at room temperature. The thermal stability of the two alloys was studied by calorimetry. A Cu...

Low-temperature friction-stir welding (FSW) was successfully applied for the joining of Al-Mg-Mn alloy with an ultrafine-grained microstructure. The low-temperature conditions preserved fine-grained microstructure and nano-scale second-phase particles in stir zone thus provided nearly-100% joint efficiency produced welds. deformation behavior welded joints studied via digital image correlation ...

This work is devoted to the study of possibility recycling bar scrap stainless metals using radial-shear rolling. In course studies on deformation in form pins made 12X18N9T austenitic steel a rolling mill, resulting was obtained microstructure two different types: periphery an equiaxed ultrafine-grained structure with grain size 0.4–0.6 microns formed; axial zone anoriented, banded texture obt...

The microstructural evolution during the equal channel angular (ECA) pressing process of an α+ θ′ two-phase Al-1.7at.%Cu alloy has been studied by transmission electron microscopy (TEM) and energy-filtered transmission electron microscopy (EF-TEM). The θ′ precipitates are fragmented into fine particles after a few passes of ECA perssing. The θ′ precipitates are almost completely dissolved after...